The Problem Solver - Hotpoint DLB1250B Use And Care Manual

The Problem Solver
(continued)
PROBLEM
WRINKLING IN
PERMANENT PRESS
AND "NO-IRON"
ITEMS (continued)
POSSIBLE CAUSE AND REMEDY
• Accumulation of lime scale due to use of carbonate detergents. If you must use a
non-phosphate detergent, avoid the use of a high-carbonate detergent.
• Failure to use fabric softener. Proper use of fabric softener will minimize wrinkling.
To remove wrinkles:
1. Retumble for 45 minutes.
2. Rerinse and dry for45 minutes.
3. Iron carefully.
4. Send todry cleaners fortressing.
5. Some wrinkles may remain which cannot be removed;
*NOTE: If you follow good laundry procedures and Permanent Press clothes still come
out wrinkled, the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it's the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
If you need more helo., call, toll free:
The GE Answer Center ®
800.626.2000
consumer information service
12