GE 23 Owner's Manual And Installation page 5

About the temperaturecontrols, geoom
The temperature controls are preset in the factory at 5 for both
the refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust
controls, allow 24 hours for the refrigerator to reach the setting
you have selected.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
Performance Air Flow System
The Performance Air Flow Sysmm is designed to maximize mmperaulre conuol in file iefligerator and
fleezei compartments. This unique special feaulre consists of the Air Tower along the back waU of the
refligerator and the Air Tunnel on the bottom portion of the fieezer rear wall. Placing food in fiont of the
louvers on these components will not aftbct perfommnce. Although the Air Tower and the Air Tunnel can
be removed, doing so will aft>ct temperature pe_foimance. (Fox removal insuucfions, on-line, contact us at
ge.com o, call 800.GE.(;ARES. In (;anada, contact us at geappliances.ca or call 1.800.561.3344.)
5