GE Profile PTWN8050M0WW Owner's Manual And Installation Instructions page 5

GEAppliances.com
Wash WASHABLE For the washing of machine washable wool products, provided that they are washed
C. y cles WOOL according to the instructions on the garment label. When selecting this cycle, you must use
_'cont) a detergent suitable for washing wool.
TOWELS & SHEETS For towels, sheets, comfortors and pillows
SPEED WASH For lightly soiled items that are needed in a hurry. Cycle time is approximately 55 minutes,
depending on selected options.
RINSE & SPIN To quickly rinse out any items at any time.
BASKETCLEAN Use for cleaning the basket of residue and odor. Recommended use of once per month
Soil Level
Changing the SOILLEVELincreases or decreases the wash agitation to remove different amounts of soil.
To change the SOIL LEVEL,press the SOIL LEVEL button until you have reached the desired setting.
You can choose between Extra Light, Light, Normal, Heavy or Extra Heavy soil.
Spin Speed
Changing the SPIN SPEED changes the final spin speed of the cycles. Always follow the fabric manufacturer's care
label when changing the SPIN SPEED.
To change the SPIN SPEED,press the SPIN SPEEDbutton until you have reached the desired setting. Higher spin
speeds are not available on certain cycles, such as Delicates.
Higher spin speeds remove more water from the clothes and will help reduce dry time, but may also increase the
possibility of setting wrinkles on some fabrics.
Temperature
Adjust to select the proper water temperature for the wash cycle.
Follow the fabric manufacturer's care label when selecting the wash temperature.
To change the wash temperature, press theTENP button until you have reached the desired setting.
NOTE:Not all temperature settings are available on each cycle selection.
Ply Cycles
Set up your favorite combination of settings and save them here for one touch recall.
These custom settings con be set while o cycle is in progress.
To store a MY CYCLEScombination of settings:
1. Select your washing cycle (except BASKETCLEAN).
2. Change SOIL, SPIN and TENP settings to fit your needs.
3. Select any washer OPTIONS you want (except SIGNAL).
4. Press and hold the pad for three seconds to store your selection. A beep will sound
and the pad will light up.
To recoil your stored f4Y CYCLEScombination:
Press the PIY CYCLESbutton before washing a load.
To change your stored f4Y CYCLEScombination:
Follow steps 1-4 in "To store a MY CYCLEScombination of settings".
Add Garment
The add garment indicator light is illuminated to inform you that the washer is in the proper cycle to add
garments for best performance. If you add garments when the light is off it may cause unsatisfactory
performance.
To add garments when ADD GARNENT light is illuminated:
1. Press START/PAUSE
2. Open lid after unlocked
3. Add garments
4. Close lid
5. Press START/PAUSE to resume wash cycle.
NOTE: If the washer remains idle for 2 hours after pausing the cycle, the water in the tub will drain.