Preparingto Install The Freezer - GE FCM7 Owner's Manual & Installation Instructions

Preparingto install the freezer.
Read these instructions completely and carefully.
Freezer L ocation
Your fieezer should be conveniently located for
day.to-day use in a dIy, wellwenfilated room.
Do not install the fleezer where the temperature
will go below 0 ° F or above l lO ° E because it will
not maintain proper temperatures.
Be sure to install your fleezer on a floor strong
enough to support it when it is fiflly loaded.
The fleezer must be solidly positioned on file floor
if it is to fimcfion at its best. Shims may be used to
accomplish rids wherever the floor is too uneven.
If the place selected for the fieezer is damp or
moist, place 2 X 4's (51 mm X 102 ram) under
its entire length to assure adequate support.
Clearances
On all models, allow 3" (76 mm) on top, back
and sides for proper air circulation.
Adjustable Legs
I,egs at tile flont corners of tile fleezer
should be set so tile fleezer is firmly
positioned on tile flOOL
Toraisethe freezer
7O