Download Print this page

GE Profile GSD5110 Owner's Manual page 21

Hide thumbs Also See for Profile GSD5110:

Advertisement

Dishes and flatware
not clean
Possible Causes
What To Do
Low inlet water
Make sure inlet water
temperature
temperature
is conect
(see page 12).
Use HI TEMPWASH.
Water pressure is
Turn on a f_tucet. Is water
temporarily low
coming out more slowly
than usual? If so, wait until
pressure is normal before
using your dishwasher.
Spotsandfilming
on glassesand
flatware
Air gap is clogged
Clean the air gap.
Improper rack loading
Make sure lmge dishware
does not block the
detergent dispenser or tile
wash
allns.
Extremely
hard water
Low inlet water
temperature
Overloading
the
dishwasher
Improper
loading
Old or damp powder
detergent
Rinse agent dispenser
empty
Too little detergent
Use Jet-Dry® rinse agent to
ielnove
spots
alld
prevent
new tihn build-up.
To remove stubborn spots
and p_>-exisfing tihn tiom
glasswm>:
I Remove all metal umnsils
flom the dishwasher.
2 Do not add dem_gent.
3 Select file longest (ycle.
4 Start lhe dishwasher and
allow to run for 18 tw 22
minutes. Dishwasher _ill
now be in tlm main wash.
5 ()pen the door and pour
2 cups (500 ml) of white
vinegar inu) the bottom of
the dishwasher.
6 Close file door and allow
to complete file (ycle.
If vinegar rinse doesn't
work: Repeat as above,
except use 1/4 (:up (60 ml)
of ciwic acid c_ystals
instead of vinegar.
21

Advertisement

loading