Replacement Parts; Installing The Washer - GE Spacemaker WSSH300 Owner's Manual & Installation Instructions

Installation Instructions
INSTALLING THE WASHER (cont.)
7. Fo_m a U shape on tile end of tile drain hose with
tile hose pointed toward tile drain. Place tile hose
in a laundry tub or standi)ipe and secure it with
tile cable tie provided in tile enclosm'e package.
NOTE: If the drain hose is placed in a standpii)e
without limning a U shape, a siphoning action could
occm: There must be an air gap around tile drain hose.
A snug hose fit can also cause a siphoning action.
CableTie
CableTie
CableTie
8. Plug tile power cord into a grounded outlet.
NOTE: Check to be sure the power is off at a
circuit breaker/fllse box before plugging the power
cord into an outlet.
9. Turn on tile power at a circuit breaker/fllse box.
10. Read the rest of this Owner's Manual. It contains
wduable and hell)tiff information that will save vou
time and monev.
11. Before starting the washer, check to make sure:
Main power is turned on.
Tile washer is plugged in.
Tile water fimcets are turned on.
F_IThe unit is level.
Tile shiI)ping support hardware is removed
and saved.
Tile drain hose is properly tied up.
There are no leaks at tile faucet, drain line
or w;ishei:
12. Rim tile washer through a complete cycle. Check
fi:,r water leaks and proper operation.
13. If yam" washer does not operate, please review
the Before You Call For Service section before
calling tar service.
14. Place these inst_ uctions in a location near the
washer fin" fllture reference.
REPLACEMENT PARTS
If replacement parts are needed
fin" your
washe_; they
can be ordered by visiting ore" Website at ge.com or bv
calling 800,GE,CARES,
16