Related Manuals for EVGA Killer Xeno Pro 128-P2-KN01
Summary of Contents for EVGA Killer Xeno Pro 128-P2-KN01
- Page 1 E n t e r t a i n m e n t P h o t o s G r a p h i c s KILLER XENO ● ● ● Installation Guide EVGA Corp. 2900 Saturn Street, Suite B Brea, CA 92821 www.evga.com 128-P2-KN01...
-
Page 2: Table Of Contents
Remove any existing network cards (if applicable). Install the EVGA Killer Xeno Pro Gaming network card into a 1x PCI-E slot. NOTE: If you do not have an empty 1x PCI-E slot, you can install the card into any open PCI-E slot, the below images show... -
Page 3: Using Hardware Accelerated Voice Chat
Using Hardware Accelerated Voice Chat If you are going to use the EVGA Killer Xeno Pro’s built in hardware voice chat, you will need to connect the included audio input/outputs correctly. There are two options for doing this, and internal, or external cable. -
Page 4: Configuring The Killer Xeno
Headset / MIC connection: Connect your microphone or headset microphone to the MIC IN jack on the EVGA Killer Xeno Pro. Connect your headphones or speakers to the LINE OUT or AUDIO OUT jack on your motherboard (if using onboard audio) or your soundcard (if using a dedicated sound card). -
Page 5: Setting Link Speed
Setting Link Speed Link speed determines how fast the Killer Xeno connects to the local network or Internet. In most cases, your local network will be much faster than your Internet connection. The following table shows the available speeds and requirements for each. Speed Description Requirement... -
Page 6: Configuring Advanced Setting
To change the duplex mode: 1. Right-click on the Killer Xeno tray icon. 2. Select Xeno Configuration. 3. Select the Main tab. 4. Under Xeno NIC, open the Mode drop-down menu and select Normal. Note: The Killer Xeno must be in Normal mode to change the duplex mode. 5. - Page 7 To use Killer Bandwidth Control, set the following for your games and applications: • Priority • Bandwidth • Connection Settings To configure Killer Bandwidth Control: 1. Right-click the Killer Xeno tray icon. 2. Select Bandwidth Control. 3. Select the Priority tab and set the priority settings for your games and applications.
-
Page 8: Configuring Killer Firewall
a. Locate the game or application and set Download and Upload settings: • Unlimited — use for most games Other programs should be set to lower bandwidths than your game, depending on the total bandwidth available. Try different settings for each program while you game, and make sure to monitor your lag. Note: Do not assign more bandwidth to a program than you have available. -
Page 9: Changing Alert Settings
To enable or disable Killer Firewall: 1. Right-click on the Xeno Killer Tray icon. 2. Select Xeno Firewall. 3. On the General tab, under Firewall, select the On button to enable Killer Firewall; select the Off button to disable Killer Firewall. Note: When Killer Firewall is enabled, alerts are also enabled automatically. -
Page 10: Technical Support
Trademark Information 2000-2009 EVGA Corp. EVGA, the EVGA logo and combinations thereof are trademarks of EVGA Corp. Bigfoot Networks, the Bigfoot Networks Logo, Killer and the Killer logo are trademarks of Bigfoot Networks, Inc. All brands, products and companies are trademarks or registered...