Operating Instructions; Options; Estimated Time Remaining Display; Wash Cycle-Cycle Selector Knob - GE Profile WPRE6150K2WT Owner's Manual

P619 washers
Table of Contents

Advertisement

Available languages

Available languages

ge.com
During winter months, when the water entering your home is colder, or for locations with very cold water year round,
use the PerfecTemp plus COLDto help dissolve powdered detergents and to improve the cleaning of your clothes.
The TAPCOLDfeature turns the PerfecTemp feature on your washer off and uses your household tap water
temperature for a COLDwash. This can provide energy savings by reducing the amount of hot water used in your
wash.
Options
Autosoak Option (on some models)
This option begins with a brief agitation, soaksfor a specified period of time, then moves through the rest of the cycle
automatically. On some models, this option is located on the Cycle Selector knob.
2nd Rinse Option (on some models)
When you use extra detergent or bleach to clean heavily soiled clothes, you may want to use the 2nd Rinse option.
It provides a second deep cold rinse.
Extended Spin Option (on some models)
Usethis option to extract more water from your clothes. Clotheswill be drier when this option is selected and will dry
more quickly in your dryer.
Fabric Softener
Set this option when adding fabric softener to the washer.
NOTE:Do not usefabric softener dispensing balls with this washer. They do not work correctly in high-efficiency
washers.
Estimated
Time Remaining
Display
m Displays the approximate time remaining until the end of the cycle.
m If the estimated time remaining is more than 60 minutes, "IH" will flash in the display followed by the additional
remaining minutes. When the time remaining is less than 60 minutes, the timer will count down.
m Cycle time is affected by how long it takes the washer to fill. This depends on the water pressure in your home.
The "smart" timer "learns" the amount of time it takes to fill your washer and adjusts the total time accordingly.
Wash Cycle-Cycle
Selector Knob
The wash cycle controls the length of the washing process.The knob can be turned in either direction. Turning the Cycle
Selector knob after starting a cycle will stop the washer and reset the cycle to the new selection. PressSTART
to begin the new cycle selection.
The chart below will help you match the wash cycle setting with your clothing.
COTTONS
PREWASH
CASUALS
EASY CARE
DELICATES
HAN D WASH
SPEED WASH
DRAIN & SPIN
TOWELS &
SHEETS
JEANS
QUICK RINSE
Forheavy to lightly soiledcottons, household linens,work and play clothes. Thiscycle providesthe
best overall cleaning and should be used for most everyday items. Providesa high speed spin.
For removing surface dirt from heavily soiled clothes. Hake sure to follow with
a regular wash cycle.
Forwrinkle-free and permanent press items and knits. Provides a low speed spin.
Forwrinkle-free and permanent press items and knits. Providesa high speed spin.
For lingerie and special-care fabrics with light to normal soil. Providesa low speed spin.
For items labeled handwashable with light soils.Providesan extra low speed spin.
Forsmall loads of lightly-soiled items that are needed in a hurry. Providesa high speed spin.
For draining the tub and spinning water out of clothes. Providesa high speed spin.
This cycle provides periods of agitation and soak tailored for washing towels and sheets.
Providesa high speed spin.
Forwashing medium to lightly soiledjeans. For heavily soiledwork jeans, use COTTONS HEAVY
cycle. Providesa high speed spin.
Rinsesand spins non-soiled items where a rinse only is desired. Providesa high speed spin.
START
PressSTARTto begin the cycle. NOTE:The lid must be closed for the washer to fill and the cycle to start. PressingSTART
again will PAUSEthe cycle and the cycle indicator light will blink.
To continue the cycle, press STARTagain. If machine is paused more than 24 hours, the cycle will be cancelled.To stop
the cycle, hold the button for ] seconds. If water remains in the machine, select the DRAIN & SPIN cycle to drain tub
and spin water out of the washer tub.
Raisingthe lid will stop the filling, agitation and spin action but does not pause the cycle.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents