Stain Inspector - GE Profile WPGT9360 Owner's Manual And Installation Instructions

Stain Inspector
www. (;EAppliances. corn
Washing
Using the
Stain
Inspector
The Stain Inspector provides l)retreatment
tips and opfim um washing ti)r specific t},])es
of stains.
Y)m select the specific stain, tid)ric D])e and colo_;
and the washer creates the wash cycle tot treating
the stain.
Example: Washing a chocolate-stained, white cotton shirt
1 Press STAIN INSPECTOR.
2 Read and follow the instructions on the
Touch Screen before treatino the tabric.
BEFORE
TREATING
FABRIC
1) REFER TO FABRIC CARE LABEL FOR
INSTRUCTIONS. USE HELP FUNCTION
FOR ADDITIONAL STAIN TIPS
2) TEST STAIN REMOVAL TIPS ON HIDDEN
AREA OF FABRIC
3) DO NOT PUT STAINED ITEM INTO DRYER
(STAIN MAY BE SET INTO FABRIC)
3 Select FOOD/DAIRY/COOKING fl'om
the list of stain categories and select
CHOCOLATE from the list of stains.
4 Press the HELP button to find pretreatment
inf0mmtion for the specific type of stain.
CHOCOLATE
- ADD AN ENZYMECONTAINING
DETERGENT, L IKE LIQUIDTIDE HE(R)
TO THE PRE-TREAT DISPENSER AND A
NIGH EFFICIENCY DETERGENT TOTHE
DETERGENT DISPENSER.
5 Select COTTONS from the list of fabric
types, and select WHITES from the list
of coloi_.
6 Fill the detergent tray with a lo_sudsing,
high-etticiency liquid detergent such as
Tide ') HE. Fill the Pretreat tray with
the proper pretreatment additive.
PRETREAT
Tray
Appearance mayvar'/
You can find additional stain categories and
stains by pressing MORE in the lower right
corner of the Touch Screen.
DetergentTra_
7 Place the stained garment(s) in the washer
first; then add the rest of the load. For best
stain remowd, only wash items with stains
matching your selection.
8 Press START.
The washer will _un a Pretreat presoak cxcle
prior
to the
main wash c_cle.
NOTE: For some stain cycles, the water
temperature for the presoak cycle may not be
the same as the water teml)erature fl)r the main
wash cycle.
IMPORTANT: Check to make sure the stain
is completel) remoxed before I)lacin'*_ the
garment in the dryer.