Features; Starting Tile Freezer - GE FUM12 Owner's Manual & Installation Instructions

About the operationof yourfreezer, ge.com
Startingthe Freezer
_] Clean the inside of the fi'eezer with a mild solution of baking soda and water (see Care and Cleaning).
] (_onnect cord to power Otlt]et.
_]On models with a Temperature Monitor or High-Temp _Mam_ Switch, set the switch to the OFFposition.
[_ Make sure the temperature control is set at 4.
_] Nlow ti'eezer to operate for at least four hotu_ before placing food inside.
On models with a Temperanu'e Monitor or High-Temp Mam_ Switch, set the switch to the 0Nposition.
Temperature Control
Freezing temperature selection is made by
setting the control from /to
7
(coldest).
If you W;lIlt colder or
W;IF/I/eI" [ei/ll)ei':ltui'es _
a(!iust the control one step at a time.
_Mlow several horus after each one-step
a(!justment tor the freezer temperature
to stabilize.
Turning the control to OFFstops the cooling
process but does not shut off power to the
freezer.
I TEMO ALARM POWER ON
k oce o_ j
Located on front of freoze_
°" °" I
HIGH-TEUP
Located on back of licL
Temperature Monitor/High-Temp Alarm
An almm will sound if the ti'eezer
temperature reaches unsaie levels.
The alam/operates on household
electricity: If the power fifils, the alam/
will not perfi)m/.
An 0N/0FFswitch allows the temperature
alam_ to be deactivated if desired. The
ti'eezer is shipped with the switch in the
OFFposition. AJ'ier the ti'eezer has run
long enough to lower the temperattn'e,
you may set the switch to the 0Nposition.
Switch (on somemodels)
CAUTION: Adding more than 3 pounds {1.5 kg)
of warm food per cubic foot of freezer capacity
can trigger the alarm.
Toactivate the alarm, set the switch to the
0Nposition.
Todeactivate the alarm, set the switch to the
OFFposition.