GE GMR04BANEBB Owner's Manual & Installation Instructions page 11

ge.com
,Upper
Tol
Left hiugelocation
Door
top cap
pJate
Spacer--'l_LLeveliug le! hhlge
DoorReversal(on somemode/s)
4 Cubic FootModels
1, Remo_t' the two screws at the back of
the top coveE
2. Remove the top cover It)}lifting the back
up about 2" and then sliding it ibrwmxt.
3. Remedy the smM1 plug button on the
left side of the door top c_lp.
4. Remo_e the three screws on the upper
hillge
(lJgllt side). Remo_._' the ]linge.
5. Remove tile three screws at the lelt
hinge location on the top plate.
6. Remo_e the screw in the middle of the
top plate and remo_+v the top plate.
7. I,ili the door up and off the botton/
hinge 0ight side).
8. Tilt the retiigemtor cabinet back to
remo\e the right h'_elJng leg.
9. P.emo_v tile screws on tile bottom
hinge (right side) mid the left h'_vling
leg. Move the bottom hinge to the left
side and secure it with tile screws and
leveling leg.
IMPORTANT: The left leg has a spacer that
must be moved to the right side leveling leg
when the door swing is reversed
10. Screw the
lJg']l|
leveling leg, with the
sl)acer in place, back in place on the
+ight side.
11. Position the door on tile ]e]_ bottom
hinge. With the magneti_ gasket
holding the door in ])lace, secm:e the
top hinge with screws.
12. Make sure the door is aligned with the
refrigerator cabinet before continuing.
14, Slide the top co\er back in place mid
re])]ace tile two sc£ews.
15, Put the plug buuon in flw hob' on the
fight side o] the door top c_lp.
!illi!iiii+ +iiii HH+i
+
11