Maintenance; Maintenanceschedule; Pressure Washer Maintenance - Speed Clean Operator's Manual

Maintenance
MaintenanceSchedule
Follow the hourly or calendar intervals, whichever occurs
first. More frequent service is required when operating in
adverse conditions noted below.
* Changeengine oil
* Check/clean water inlet screen'
* Check high pressure hose
* Check detergent siphoning hose/filter
* Check spray gun and assembly for leaks
* Cleandebris
* Check engine oil level
* Service engine air cleaner2
* Changeengine oiF
* inspect muffler and spark arrester
* Service spark plug
* Cleancooling system2
Clean if clogged. Replace if perforated or torn.
2 Service more often under dirty or dusty conditions.
General Recommendations
Regular maintenancewill improve the performance and
extend the life of the pressure washer. See any qualified
dealer for service.
The pressure washer's warranty does not cover items that
have been subjected to operator abuse or negligence. To
receive full value from the warranty, the operator must
maintain the pressure washer as instructed in this manual,
including proper storage as detailed in Winter Storage and
Long Term Storage.
NOTICE Should you have questions about replacing
components on your pressure washer, pleasecall
(800) 743-4115 for assistance.
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
All service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedule chart above.
NOTICE Once a year you should clean or replacethe spark
plug, clean or replace the air filter, and check the spray gun
and nozzle extension assembly for wear. A new spark plug
and clean air filter assure proper fuel-air mixture and help
your engine run better and last longer.
Pump Oil
DONOT attempt any oil maintenanceon this pump. The
pump is pre-lubricated and sealedfrom the factory, requiring
no additional maintenancefor the life of the pump.
Emissions Control
Maintenance, replacement, or repair of the emissions
controldevices and systemsmay be performed by any
non=road engine repair establishment or individual.
However,to obtain "no charge" emissions control service,
the work must be performed by a factory authorized dealer.
See the Emissions Warranty.
Before Each Use
1. Check engine oil level.
2. Cleandebris.
3. Check
4. Check
5. Check
6. Check
leaks.
7. Rinse
water inlet screen for damage.
high pressure hose for leaks.
detergent siphoning tube and filter for damage.
spray gun and nozzle extension assembly for
out garden hose to flush out debris.
Pressure Washer Maintenance
Clean Debris
Daily or before use, clean accumulated debris from cleaning
system. Keep linkage, spring and controls clean. Keep area
around and behind muffler free from any combustible debris.
inspect cooling air slots and openings on the pressure
washer. These openings must be kept clean and
unobstructed.
Pressure washer parts should be kept clean to reducethe
risk of overheating and ignition of accumulated debris.
* Use a damp cloth to wipe exterior surfaces clean.
NOTICE improper treatment of pressure washer could
damage it and shorten its life.
• DONOTinsert anyobjectsthroughcoolingslots.
* Use a soft bristle brush to loosen caked on dirt, oil, etc.
* Use a vacuum cleaner to pick up loose dirt and debris.
Check and Clean Inlet Screen
Examine the screen on the pump's water inlet. Clean it if the
screen is clogged or replaceit if screen is damaged.
15