Advertisement
BEFORE INSTALLING THIS ACCESSORY, SHUT THE UNIT'S ENGINE OFF AND ALLOW IT TO COOL.
DISCONNECT SPARK PLUG WIRE FROM SPARK PLUG. REFER TO THE OPERATOR'S MANUAL FOR COMPLETE SAFETY INSTRUCTIONS.
DO NOT OPERATE UNIT WITHOUT ENTIRE GRASS COLLECTOR IN PLACE. STOP BLADE BEFORE EMPTYING GRASS COLLECTOR.
Grass Bag Installation
1. Place grass bag (A, Fig. 4) over chute assembly (B).
2. Insert pointed end of plastic cable tie (C) into eyelet end of
cable tie. Make sure cable is positioned so it ties bag
around indented groove portion (over flange) of chute. Pull
cable tight with pliers.
For customer assistance, visit www.troybilt.com, contact your nearest authorized dealer or:
TROY-BILT LLC, P.O. BOX 361131, CLEVELAND, OHIO 44136-0019, 1-866-840-6483
Printed in U.S.A.
WARNING!
C
A
B
Fig. 4
Form 769-00141 (02/02)
Advertisement
