Playback; Disc Menu; Resume Playback; Pause - Sylvania CD130SL8 Owner's Manual

Playback

Before you begin:
Turn on the amplifi er and any other device which is connected to this unit.
Make sure the external audio receiver (not supplied) are set to the correct
input mode.
1
Press [POWERy] to turn on the unit.
2
Press [OPEN/CLOSE A ].
• The unit switches to the DVD mode when the unit
was in TV mode.
3
Insert a disc with its label side facing up.
• In case the DVD was recorded on both sides, make
sure the label of the side you want to play back is
facing up.
4
Press [PLAY B]. The tray will close and playback will
start.
• If playback does not start automatically, press
[PLAY B] again.
5
Press [STOP C] to stop playback temporarily.
• If playback remains stopped for 5 minutes, the screen
saver program will activate automatically,
and in 15 minutes with no activity at the unit, the unit
will turn off when "AUTO POWER OFF" is set to "ON"
(factory default).
6
Press [OPEN/CLOSE A ] to eject the disc.
Align the disc to the
disc tray guide.
Note:
• " " may appear at the top-right on the TV
screen when the operation is prohibited by
the disc or this unit.
• Some DVD may start playback from title 2 or 3 due to specific
programs.
• During the playback of a 2-layered disc, pictures may stop for
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is not a malfunction.

Disc Menu

DVD
Some discs contain disc menus which describe the contents of the disc or
allow you to customize disc playback, or title menu which lists the titles
available on the DVD.
Press [DISC MENU] to call up the disc menu, or press
[TITLE] to call up the title menu.
Use [Cursor K / L / s / B] to select an item, then press
[ENTER] (or [PLAY B]).
Note:
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.

Resume Playback

Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B]. Playback will
resume from the point at which
playback was stopped.
Note:
• To cancel resume information, press [STOP C] again in the stop
mode.
• The resume information will be kept even when unit is turned
off. However, opening the disc tray will cancel the resume fea-
ture. Playback will start at the beginning the next time you
insert the disc.

Pause

Press [PAUSE F] during playback.
• Playback will be paused and sound will be
muted.
To continue playback, press [PLAY B].
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
23
EN