When installing: Install the battery pack in the slot, and then esure that the battery latches are in the
locked position.
1020 Hard disk drive or solid-state drive
For access, remove this FRU:
•
"1010 Battery pack" on page 56
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the computer is operating or in suspend mode.
Removal steps of hard disk drive or solid-state drive
Note: Loosen the screw
1
.
57
.
Chapter 9
Removing or replacing a FRU