Advertisement
TELE-FIXTURE PREPARATION - ONE LIGHT RUN
(Note: The over all length of the tele-fixture plus the right hand end plate must match the distance between the last
hanging fixture and the wall.)
1.
2.
(Note: To stagger the lamps, the blank channel on both the tele-fixture and the fixture before the tele-fixture may have to be measured
to cut as shown in Fig. 3A and Fig. 3B on page 4)
(Note: When the tele-fixture follows a 3 foot or 4 foot fixtures, the socket channel and the blank channel must be reversed.)
For 1 Light 36" Tele-Fixture
A.
B.
and ceiling trim.
Lighting Systems
For 1 Light 48" Tele-Fixture
A.
the wall and ceiling trim.
B.
Straps Removed
Figure 9
We reserve the right to change details of design, materials and finish.
IS-PTS7
Figure 8
Advertisement
