Eden World Tour WT1250 Operation Manual page 4

GENERAL SPECIFICATIONS
WT1550:
Size
Weight
EIA rack
Power Output
Bridge Mode
Headroom
Damping Factor
Freq. Response
Distortion THD
Power Requirements – The WT1550 needs a separate properly grounded
20 Amp circuit @ 120 Volts for correct operation and best sound quality.
FOR YOUR SAFETY DO NOT REMOVE OR MODIFY THE
GROUND ON YOUR POWER CABLE.
Fuse Requirements:
USA @ 120 Volts /60 HZ - 14 Amps, 5 x 20 mm GMC/T/slow blow
Europe @ 240 Volts/50 Hz - 7 Amps, 5 x 20 mm GMC/T/slow blow
Japan @ 100 Volts/60 Hz - 15 Amps, 5 x 20 mm GMC/T/slow blow
Operation and Power Requirements – For best electrical operation and
sound quality this unit should have a properly grounded, dedicated 20
Amp circuit for itself.
WT1250:
Size
Weight
EIA rack
Power Output
Bridge Mode
Headroom
Damping Factor
Frequency Response
Distortion THD
3.5" x 19" x 14.5"
32 Lbs.
2 Space w/ min. clearance
@ 8Ω: 2 x 300 Watts RMS; @ 4Ω: 2 x 600 Watts RMS;
@ 2Ω: 2 x 750 Watts RMS (Both channels driven)
@ 8Ω: 1200 Watts RMS; @ 4Ω: 1550 Watts RMS
+3dB min.
better than 100 from 20Hz to 1Khz
10Hz to 20KHz +/- 2dB
< .1 %
3.5" x 19" x 14"
28 Lbs.
2 Space w/ min. clearance
@ 8Ω: 2 x 300 Watts RMS; @ 4Ω: 2 x 500Watts;
@ 2Ω: 2 x 625 Watts RMS (Both channels driven)
@ 8 Ohms: 1000 Watts RMS; @ 4Ω: 1250 Watts RMS
+3dB min.
better than 100 from 20Hz to 1Khz
13Hz to 20KHz +/- 3dB
.06 %
4