Table of Contents
Advertisement
General Description
Overview of front panel
The buttons on the lower-right panel control your TV's basic features, including the
on-screen menu. To use the more advanced features, you must use the remote control.
TV/AV
Toggles between all the available
input sources.
MENU
Press to see an on-screen menu
of your TV's features.
r s
PROG /
Press to change programs.
In the on-screen menu, use the
r s
PROG / buttons as up/down
arrow buttons.
VOL+/-
Press to increase or decrease the
volume. In the on-screen menu,
use the VOL+/-buttons as left/
right arrow buttons.
Standby button
Press
button to toggle between
normal and standby mode.
POWER INDICATOR
Red: In standby mode.
REMOTE CONTROL SENSOR
Aim the remote control towards
this spot on the TV.
POWER SWITCH
Note:
1.
Sensor lights will turn off within 6 seconds of
the last operation.
2. In order to void errors, the TV will go into
a
standby mode after touching the standby
button for 2 seconds. In standby mode, the
standby indicator will remain illuminated, all
other indicators will be off.
3. When the sensor indicator lights are off, they
are still active and will respond to the first touch.
4. Please do not touch the buttons in rapid
su cession.
c
5. When the TV initialises during power up, all
sensor lights on the front panel will flash
sequentially, cycling from left to right. When the
TV has finished the initialising process, the cycle
will cease and all light indicators will remain off
until touched.
6. When recording in normal/standby mode, the
logo will cycle from bright to dull for the duration
of the recording--see logo led pg. 36 for details.
11
Advertisement
Table of Contents
