Related Manuals for MTD PRO HWE 80
Summary of Contents for MTD PRO HWE 80
- Page 1 MODELS HWSS 80, HWE 80 80 LB Rotary Spreader Optional Equipment Calibration PARTS LIST AND INSTRUCTIONS...
- Page 2 Rotary Spreaders - Parts List The Optional Jet-Action Deflector Part No. 01002274 Ref. Part Description Qty. 00061064 SS Handle 00061065 SS Bracket 01002275 Deflector 00061053 SS Washer 00061052 SS Cotter Pin 00060083 SS Ext. Tooth Washer 00061050 SS Machine Screw Shutoff Assembly Operating Lever Rod Assembly...
- Page 3 00016354 Box (not shown) 35 00060045 Rate Control Plate 36 00060046 Screen Clip, SS 37 00060047 Mach. Screw, 1/4-20 x 1-1/2 Rd. Optional Accessories for MTD Pro Rotary Spreaders Phil. Hd., SS 01002274 Jet Action Deflector Ass'y. 38 00005530 Flat Washer, 3/8 Nylon...
-
Page 4: Mounting Instructions
The Optional Remote Deflector - Part No. 01002278 Mounting Instructions Ref. Part No. Description Qty. Remove the right rear bolt holding the hopper to the 00060034 Operating Lever and Rubber Handle frame but save the nut. Install a 1/4-20 x 2" pan head 00030417 Bracket, Dual Lever machine screw (Ref. -
Page 5: Parts List
The Optional Remote 3rd Hole Slide - Item No. 01002279 Mounting Instructions Parts List 1. Drill a 9/32" hole in the upper handle assembly as Ref. shown in the sketch on the opposite page. Part No. Description Qty. 2. Mount the dual lever bracket (Ref. 1) to the right 00030417 Bracket, Dual Lever handle using one machine screw (Ref. - Page 6 Rotary Spreaders - Assembly Instructions Remove the spreader components from 4. Fasten the on/off lever to the handle's bracket lugs using the clevis pin in the the carton. You should find all of the parts bottom hole of the lever. Insert the clevis shown above plus the Hardware pin from left to right, facing the rear of the Package.
-
Page 7: Spreader Calibration
Spreader Calibration Two items must be considered when calibrating a spreader. The first is the distribution pattern of the spreader. That is, the pattern the prod- uct makes as it strikes the ground after being thrown out by the spreader's impeller. There are many factors which affect the distribu- tion pattern of a rotary spreader and some of them relate directly to the product. - Page 8 1. What Is Covered By This Warranty. This limited warranty covers any defect in materials or workmanship in your MTD Pro equipment for one year from the date of purchase for the first user purchaser. MTD Pro will replace or repair any part or parts without charge through your authorized MTD Pro dealer.