Summary of Contents for Pelikan DNDC540DV
-
Page 1: Dome Camera
Digital Day&Night Dome Camera Instruction Guide Model# DNDC540DV www.PelikanCam.com... -
Page 2: Features
ßö Features Warning ßö The camera requires periodic inspection. Horizontal Resolution of 540 TV High Sensitivity Contact an authorised technician to carry out the inspection. Lines The built-in high sensitivity SONY COLOR Clear image quality has been achieved by Stop using your camera when you find it malfunctioning. CCD enables a clear image even in employing a SONY CCD with 410,000 0.3Lux(0.1Lux B/W) or as low as 0.002Lux... -
Page 3: Table Of Contents
ßö Contents Features Camera Operation ßöMenu Warnings and Precautions ßöSettings • LENS (selection) Components • SHUTTER (condition and speed control) Names and Functions of Parts • WHITE BALANCE control ßöLens • BLC (Back Light Compensation) ßöOSD • AGC (Auto Gain Control) ßöVBS-EXTRA •... -
Page 4: Components
ßöPrecautions Do not install the camera in Do not install or use the camera in an Do not drop the camera or protect Never keep the camera pointed extreme temperature conditions. environment where the humidity is high. it from physical shocks. directly at strong light. - Page 5 ßöComponents Names and Functions of Parts ßö 1. COLOR DOME CAMERA 2. SCREWS 3. WIRE FOR VBS-EXTRA 4. INSTRUCTION GUIDE Digital Day&Night Dome Camera Digital Day&Night Dome Camera...
-
Page 6: ¡Á Names And Functions Of Parts
Names and Functions of Parts ¡á ¡á Names and Functions of Parts ¨ç LENS : Vari-Focal DC Auto Iris Lens ¨é VBS-EXTRA FOR CONNECTING TO LCD (2.5mm~6.0mm / F1.2, 3.8mm~9.5mm / F1.2 Please use the supplied wire when connecting to LCD 2.9mm~10.0mm / F1.2, 4.0mm~9.0mm / F1.5) VBS-EXTRA ¨ê... -
Page 7: Installation
ßöInstallation 1. Dome Base Mounting - Open the dome cover by loosening 3 screws using special wrench provided. - Mount the base of camera to a sturdy surface using 4 screws (1.5 inch) and 4 premade holes on the base of the dome. 2. -
Page 8: Camera Operation
ßöCamera Operation ßö Menu ßö Settings Settings can be made using the 5 buttons located in the camera. SETUP menu LENS (selection) ¶U MANUAL ¶U DC SHUTTER ¶U ESC ¶U MANUAL ¶U FLK (condition and speed control) ¶U ATW ¶U AWC ¶U MANUAL WHITE BALANCE control ¶U OFF... - Page 9 ßöCamera Operation ®\ MANUAL : Manual Lens selection SETUP ®\ DC : Auto Iris Lens selection Select any function you Modes can be changed LENS MANUAL wish to operate by using the LEFT and SHUTTER using the UP and RIGHT buttons. WHITE BAL.
-
Page 11: Blc (Back Light Compensation)
ßöCamera Operation BLC (Back Light Compensation) AGC (Auto Gain Control) When there is a strong backlight behind the object, clear images of the 1. Position the cursor to point to 'AGC' on the SETUP menu by using the background as well as the object can still be obtained by using the UP and DOWN buttons. -
Page 12: Dnr (Digital Noise Reduction)
ßöCamera Operation DNR (Digital Noise Reduction) The level of background noise in low light decreases automatically as the 1. Position the arrow to point to 'SENS UP' on the SETUP menu by using the level of gain changes. UP and DOWN buttons. 2. -
Page 13: Special
ßöCamera Operation SPECIAL 1. Position the cursor to point to 'SPECIAL' on the SETUP menu by using the 3) Press the SET button. UP and DOWN buttons. 2. Select the mode required by pressing the UP or DOWN button. SPECIAL CAMERA ID COLOR SYNC... - Page 14 ßöCamera Operation 5) When the camera ID is complete, select a position for the name to be Note displayed. • When the AGC is turned off, COLOR does not operate. • When an infrared light is used, there may be a problem with focusing. •L Move the cursor onto 'POS' and then press the SET button.
-
Page 15: Exit
ßöCamera Operation • Please select the area you do not wish to appear from the 4 areas in ®\ MOTION DETECTION: This product has a feature that allows you to observe movements of objects AREA SEL mode. • Please select ON mode for the chosen area. in 4 different areas on the screen, and the words 'MOTION DETECTED' •... -
Page 16: Troubleshooting
ßöTroubleshooting If there are problems with the camera operation, check the tables below. If Problems Troubleshooting the problem persists, please contact the agent who supplied the product. The MOTION • Check if 'MOTION DETECTION' mode is Problems Troubleshooting DETECTION function is turned on. -
Page 17: Specification
ßöSpecifications ITEM NTSC AC24V / DC12V DC12V AC24V / DC12V DC12V Power Source 215mA(AC24V)/250mA(DC12V) 160mA 215mA(AC24V)/250mA(DC12V) 160mA Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Size 1/ 3 inch interline transfer CCD Scanning System 2:1 Interlace INT/LL Selectable...
Need help?
Do you have a question about the DNDC540DV and is the answer not in the manual?
Questions and answers