Sensor Data Transmission; Clock; Clock Reception; Set Clock - Oregon Scientific BAR210 User Manual

NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures
below freezing.

SENSOR DATA TRANSMISSION

The main unit will automatically search for the outdoor
sensor. The sensor reception icon in the remote sensor
area shows the status:
ICON
and "--.-
"
NOTE If the sensor is not found, check the batteries,
obstructions and remote sensor location.
For best results:
• Place the sensor out of direct sunlight and rain.
• Position the sensor facing the main unit, minimizing
obstructions.
• Place the sensor in a location away from metallic or
electronic objects.
• Position the sensor close to the main unit during cold
winter months.
BAR210 EN R8.indd 4
DESCRIPTION
Main unit is searching for
sensor.
A channel has been found.
Sensor data received.
The sensor cannot be
found.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock
automatically with a clock signal.
BAR210:
• EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
BAR210U:
• UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
BAR210A:
• WWVB-60 signal: within 3200km (2000 miles) of
Fort Collins Colorado.
To enable / disable signal reception:
Press and hold to enable or
reception.
NOTE Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.
Clock signal reception indicator:
STRONG
WEAK SIGNAL
SIGNAL

SET CLOCK

To set the clock manually, disable the signal reception first.
1. Press and hold CLOCK.
4
to disable signal
NO SIGNAL
2/15/08 12:10:32 PM