Craftsman 917.389621 Owner's Manual page 17

ROUBLESHOOTING CHART
PROBLEM CAUSE CORRECTION
3rass catcher 1. Cutting height too low. 1. Raise cutting height.
_otfllling (if so 2. Lift on blade wom off. 2. Replace blade.
)quipped) 3. Catcher not venting air. 3. Clean grass catcher.
-lard to push 1. Raise cutting height. 1. Grass is too high or wheel
height is too low.
2, Rear of lawn mower
housing or blade dragging
in grass.
3. Grass catcher too full.
4. Handle height position not
right for you.
2. Raise rear of lawn mower
housing one (1) setting
higher.
3. Empty grass catcher.
4. Adjust handle height to
suit.
17