Guest Mode; User Profile; Setting User Profile - Oregon Scientific GR101 User Manual

Press ▲ / ▼ to adjust the
values of each setting. Press SET to
confirm.

GUEST MODE

The Guest Mode is for users without a
User Profile set up. You can measure
your weight and BMI in this mode.
1. Press Guest/Weight. Once the
Reception icon
Scale's LED Indicator is blank, the
Remote Monitor is ready to receive
2. Follow Steps 3 and 4 of the USER
PROFILE MEASUREMENTS
section.
You can choose to skip the
next set of instructions if you do not
want to measure your Body Fat and
Body Water levels.
3. Once the green LED stops blinking,
the Remote Monitor will prompt you
for:
a.
Gender:
b. Birth Month
c. Birth Year
d. Height:
• In centimetre (cm) if kg
(kilogram) weight unit was
selected.
• In feet and inches if lb
(pound) or st-lb (stone)
weight unit was selected.
blinks and the
Male / Female
icon appears
Press ▲ / ▼ to adjust the
values of each setting. Press SET to
confirm.
4. When completed, your Body Fat and
Body Water measurements will be
alternately displayed on the Remote
Monitor.

User Profile

SETTING USER PROFILE

With this product, you can set and store
the age, gender, and height for up to four
people (User 1 to 4) who regularly use the
Body Fat Monitor.
If the batteries are low, you cannot
store the height and age to memory.
1. On the Remote Monitor, each user is
represented by one of the four User
Switches. Press 1, 2, 3, or 4 to select
a user.
Make sure not to store your
height and birth date over someone
else's existing profile.
2. Once the green LED stops blinking,
the Remote Monitor will prompt you
for:
a.
Gender:
b. Birth Month
c. Birth Year
Male / Female
icon appears