Assembly - Craftsman 944.629540 Owner's Manual

ASSEMBLY
Your new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To
ensureosafe and proper operation of your tiller all parts and hardware you assemble must be tightened securely. Use the
correct tools as necessary to insure proper tightness.
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly easier. Standard
wrench sizes are listed,
(1) Utility knife "
(1) Screwdriver
(1) Pair of pliers
(2) 1/2" wrenches
OPERATOR'S POSITION (See Fig. 1)
When right or left hand is mentioned in this manual, it
means when you are in the operating position (standing
behind tiller handles).
FRONT
LEFT RIGHT
OPERATOR'S
POSITION
FIG. 1
CONTENTS OF HARDWARE PACK
(1) Manual
(1) Plastic Cable Clip
(2) Carriage Bolts 5/16-18 UNC x 2-3/8 Gr. 5
©
(2) Flange Locknuts 5116-18 UNC
(2) Hex Bolts 5/16-18 x 1-1/4
(1) Bottle Engine Oil
©
(2) Hex Nuts 5/16-18 (2) Lock Washers 5/16
6