Symbols - Craftsman 315.117280 Operator's Manual

Someofthefollowing symbols maybeusedonthistool.Please s tudythemandlearntheirmeaning. Proper i nterpreta-
tionof thesesymbols willallowyoutooperate thetoolbetterandsafer.
SYM BOL NAME DESIG NATION/EXPLANATION
V Volts Voltage
A Am peres Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
n o No Load Speed Rotational speed, at no load
[] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
Read The Operator's Manual operator's manual before using this product.
O Always wear safety goggles or safety glasses with side shields,
Eye Protection
or a full face shield when operating this product.
_, Safety Alert Precautions that involve safety.
your
Failure to keep your hands away from the blade will result in
No Hands Symbol serious personal injury.
No Hands Failure to keep your hands away from the blade will result in
Symbol
serious personal injury.
No Hands Symbol Failure to keep your hands away from the blade will result in
serious personal injury.
Failure to keep your hands away from the blade will result in
No Hands Symbol
serious personal injury.
Hot Surface
®
To reduce the risk of injury or damage, avoid contact with
any hot surface.