Reversing The Door - GE EGD4500 Owner's Manual

About reversing the door.
Reversing the Door
Tools needed
• Standard#2 • Tape-tipped
Phillipsscrewdriver pun knife
_] (-)pen the door and remove the filler plugs opposite tile hinges. _4"ith the door
c()mpletely open, remo_e tile bottom screw fl'om each hinge on tile dryer fi_ce.
]nse_l these screws about halfway into tile TOP holes, fiw each hin_,e on tile opposite
side (where you remoxed tile filler plugs). App1) tim/pressure to _(,et tile screw started
in new holes.
[_I,oosen top screw fl'om each hinge on tile dryer ti_ce half wax'. _Mth one hand holding
tile top of tile door and tile other hand hold'ing tile bottoml remo;e tile door fl'om '
tile (h_er b) lifiing it UP and OUT
_] Rotate tile door 180 °. Insert it on tile opposite side of tile opening b) moving tile door
/Nand DOWN until tile top hinge and tile bottoin hinge are resting on tile top screws
inserted in step 1.
/\
\
Remove tile remaining screws fl'om tile side of tile o _enin_, fl'om which tile door
[] WaS relllo_,ed. With these screws, sec/li'e each hinge _It tile i_ottoi_l. Tighten tile
two top screws of each hinge Reinse_t tile plastic plugs on tile side from which
tile door
was i'eillo_,ed,
10