Craftsman 917.28848 Operator's Manual page 22

TO INSTALL MOWER
Be sure tractor is on level surface and engage
parking brake.
1. Lower attachment lift lever to it's lowest
position.
& CAUTION: Lift lever is spring loaded.
Have a tight grip on lift lever, lower it slowly
and engage in lowest position.
2. Turn steering wheel to the left as far as it
will go and position mower on right side of
tractor with deflector shield to the right.
Pivot bar towards you and insert other
end of bar into hole in rear mower
bracket (D). Move mower as needed
to insert bar.
NOTE: Be sure mower side suspension
arms (A) are pointing forward before sliding
mower under tractor.
Secure with washer and retainer
spring as shown.
5. ATTACH MOWER SIDE SUSPENSION
ARMS (A) TO CHASSIS - Position hole
in arm over pin (B) on outside of tractor
chassis and secure with washer and
retainer spring.
3. Slide mower under tractor until it is cen-
tered under tractor.
4. FIRST INSTALL ANTI-SWAY BAR (S) -
From right side of mower, insert ant-sway
bar into hole in transmission bracket (T).
6. Repeat on opposite side of tractor.
7. ATTACH REAR LIFT LINKS (C) - Lift
rear corner of mower and position slot
in link assembly over pin on rear mower
bracket (D) and secure with washer and
retainer spring.
8. Repeat on opposite side of tractor.
9. Turn steering wheel to position wheels
straight forward.
22