Craftsman 315.117250 Operator's Manual page 5

Important:Some of thefollowing symbols maybeusedonyourtool.Please study themandlearntheirmeaning.
Proper i nterpretation ofthesesymbols w illallowyoutooperate thetoolbetter andsafer.
SYMBOL NAME DESIGNATION/EXPLANATION
V
A
Hz
W
min
nO
[]
/min
A
Q
@
Volts
Amperes
Hertz
Watt
Minutes
Alternating Current
No Load Speed
Class II Construction
Per Minute
Safety Alert
Eye Protection
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc. per minute
Precautions that involve your safety
Always wear safety goggles or safety glasses with side shields
and a full face shield when operating this product.
Do not expose to rain or use in damp locations.
Wet Conditions Alert
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves
eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention
measures.
SYMBOL MEANING
DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
,_ CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices that may cause property damage.
Important: Advises you of important information or instructions vital to the operation or maintenance of
the equipment.
Note: Advises you of additional information concerning the operation or maintenance of the equipment.
5