GE WBSR1060T Owner's Manual page 16

Beforeyoucall for service...
Troubleshooting tips
Possible Causes What ToDo
Drain hose is kinked or _'
improperly connected
Straighten drain hose and
make sure _rasher is not
sitting on it.
Top of drain outlet should
be less than 8 ft. above
floor.
Fill hoses or drain hose is
improperly connected
Make sure ihose:
connections are tight at
faucets and make sure end
of drain hose is correctly
inserted in and secured to
drain facility.
•Household drain may
be dogged
• Check household
plumbing. You may need
to call a plmnber.
Constant water pressure • Tighten hoses at the
to the fill hoses at the faucets and mrn the water
water source off after each use.
• Check condition of the fill
hoses; the)' may need
replacement after 5 years.
Washer is uneven • Make sure washer is level,
and firm to the floor.
Washer load is
unbalanced
Push the Cycle knob in to
stop the musher, open the
lid and redistribute the
load evenly. Close the lid
and restart.
The washer normally pauses
between washing steps
Incorrect cycle selected • Make sure the ,cycle
selected matches the load
you are washing.
-k