GE AEH05 Owner's Manual And Installation Instructions page 4

About the controlson the air conditionermmodels with touchpads.
Features and appearance will van
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Thedisplay alwaysshowsthe room
temperatureexceptwhen settingthe
Set temperatureor the Delaytimer.
Light indicatesthe unit
is in the temperature or
delay time Set mode.
m Auto
m High m Fan Only
am Ned _,_ Energy Saver
w, Low m Cool
_ _SFe_d_d_EMode _ J Fan
Light indicates the
delay timer is set.
Delay
O Delaytimer --
Decrease I
O o'e eeo'-- T-
O an speed
Decrease
Temperature --
set hlcrease
and Decrease
Delay timer Increase
Auto Fan on/off
Fan speed Increase
Unit power on/off
Air Conditioner Controls
Remote Control
Contro/s
O ower Pad
Turns air conditioner on mM off. When
ulrned on, the display will show the room
temperature.
0 Display
Shows tile room temperature or time
remaining on the Del W fimeL Shows the Set
mmperature while setting the mmperature in
Cool or Energy Saver modes. The Set light will
mrn on while setting.
NOTE: The display will change
to show file
room temperature after settings have been
made. To recall the Set mmpemmre, press the
TempIncrease • or Decrease • pads.
O emp Increase •/Decrease • Pads
Use to set temperature when
in Cool or Energy
Savermode. The Setlight will mrn on while
setting.
O Delay fimerlncrease • (+)/Decrease • (-)
Pads
Each touch
of the Increase •/Decrease •
pads on the unit or the
Increase+/Decrease
-
pads on the remote control will set the delay
time when using tlle
Delay 1-24hr
timer ((_).
The Setlight will mrn on while setting.
O an Speed Pads
Use to set the fan speed to LOW,Med, High
or Auto on the unit. NOTE: On the remote
conuol, use the fan speed Increase +/
Decrease - pads to set the fan speeds
to LOW,
Med or High. Use tt_e Auto pad m mrn Auto
filIl Oil.
O ode Pad
Use to set tl_eair conditioner to Cool,Energy
Saveror FanOnlymode.
0
Delay Pads
Delay ON--When the air conditioner is of L it
can be set to automatically come on in 1 to 24
hems at its previous mode and fan settings.
Delay OFF--When the air conditioner is on,
it can be set m automatically mrn off in 1 m
24 hems.
How toset:
Press file Delay 1-24hr pad on the trait or
die _ pad on file remora conUol. Each touch
of the Increase •/Decrease • pads on the
unit or the Increase +/Decrease- pads on
tile remote control will set the timer in
1-hour intervals. The Set light will mrn on
while setting.
To review die remaining
time on die Delay
1-24hrtime_; press the Delay 1-24hr pad on the
unit or the @ pad on the remote control. Use
the Increase •/Decrease • pads on the unit
or the Increase +/Decrease-pads on the
remote control to set a new time if desired.
To cancel the timer, press tt_e Delay 1-24hr pad
until tile light on the Delay 1-24hr pad goes off:
4