GE DDE8200G Use And Care Manual page 12

The Problem
Solver
(continued)
PROBLEM POSSIBLE CAUSE AND REMEDY
WRINKLING IN
PERMANENT PRESS
AND "NO-IRON"
ITEMS (continued)
• Accumulation of lime scale due to use of carbonate detergents• If you must use a
non-phosphate detergent, avoid the use of a high-carbonate detergent•
• Failure to use fabric softener• Proper use of fabric softener will minimize wrinkling.
To remove
wrinkles:
• Rctumble on "Permanent Press" setting•
• Rerinse and dry on "Permanent Press" setting•
• If unsuccessful, retumble on high heat for 10-12 minutes and hang immediately•
• Iron carefully•
• Send to dry cleaners for pressing•
• Some wrinkles may remain which cannot be removed'?
*NOTE: If you follow good laundry procedures and Permanent press clothes stillcome
out wrinkled, the finish may not be good quality• Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic• Since it's the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result•
If VOUneed more helo., call. toll free:
GE Answer Center"" '
800.626.2000
consumer information service
12