Table of Contents
Advertisement
The following error messages are displayed under certain error conditions:
RS-232
Display
Err2
Err2
"- - . -"
"- - - - -"
Err5
Err6
*: The exact analog output behavior is a function of the command "o"; see previous Chapter.
Note that these error codes are not applicable when using the FOB100-SOFT software package. This high-
level software package is programmed to automatically handle all types of errors, as outlined in the next
section.
6 E
RROR
Analog Out
Internal memory checksum error. Memory corruption.
Contact Omega.
Hi-Lo, 0.5 Hz*
Temperature out of maximum instrument limits or no signal
Argument out of range
Unrecognized command
17
C
ODES
Description
Advertisement
Table of Contents
