Advertisement
Available languages
Available languages
Hazard Zone
I,d
_.WARNING:
Do not use trimmer
head as a fastening device for the
blade.
dt_WARNING:
The blade continues
to spin after the throttle is released or,
engine is turned off. The coasting blade
can throw objects or seriously cut if ac-
cidentally touched. Stop the blade by
contacting the right hand side of the
coasting blade with material already cut.
Stop coasting
blade by contact
'_
with cut material.
®
OPERATOR
SAFETY
• Dress properly. Always wear safety
glasses or similar eye protection when
operating, or performing maintenance
on your unit. (Safety glasses are
available.) Eye protection should be
marked Z87.
• Always wear face or dust mask if op-
eration is dusty.
• Always wear hea W, long pants, long
sleeves, boots, and gloves. Wearing
safety leg guards is recommended.
• Always wear foot protection.
Do not
go barefoot or wear sandals.
• Secure hair above shoulder length.
Secure or remove loose clothing and
jewelry or clothing with loosely hang-
ing ties, straps, tassels, etc. They can
be caught in moving parts.
• Being fully covered also helps protect
you from debris and pieces of toxic
plants thrown by spinning line/blade.
• Stay Alert. Do not operate unit when
you are tired, ill, upset or under influ-
ence of alcohol, drugs, or medication.
Watch what you are doing; use com-
mon sense.
• Wear hearing protection.
• Never start or run the engine inside
a closed room or building. Breathing
exhaust fumes can kill.
• Keep handles free of oil and fuel.
• Always use the handlebar
and a
properly adjusted
shoulder
strap
with a blade (see ASSEMBLY).
UNIT/MAINTENANCE
SAFETY
,_,WARNING:
Stop unit and dis-
connect
the spark plug before per-
forming maintenance
(except carbure-
tor adjustments).
• Look for and replace damaged
or
loose parts before each use. Look
for and repair fuel leaks before use.
Keep unit in good working condition.
• Throw away blades that are bent,
warped, cracked,
broken, or dam-
aged in any other way. Replace trim-
mer head parts that are cracked,
chipped,
broken, or damaged
in any
other way before using the unit.
• Maintain
unit according
to recom-
mended
procedures.
Keep blade
sharp. Keep cutting line at the prop-
er length.
• Use only Craftsman brand replace-
ment line. Never use wire, rope,
string, etc.
• Install required shield properly before
using the unit. Use the metal shield
for all metal blade use. Use the plastic
shield for all line trimmer use.
• Use only specified
blade or trimmer
head; make sure it is properly
in-
stalled and securely fastened.
• Never start engine with clutch
shroud removed.
The clutch can fly
off and cause serious
injury.
• Be sure blade or trimmer head stops
turning when engine idles.
• Make carburetor
adjustments
with
the lower end supported
to prevent
blade or trimmer line from contacting
any object. Hold unit by hand; do not
use the shoulder strap for support.
• Keep others away when making car-
buretor adjustments.
• Use only recommended
Craftsman
accessories
and replacement
parts.
• Have all maintenance
and service not
explained in this manual performed by
your Sears Service Center.
Advertisement
