Olivetti d-Copia 3501 Operation Manual page 161

11 Touch the [RESOLUTION] key.
AUTO
EXPOSURE
300x300dpi
RESOLUTION
AUTO
ORIGINAL
12 Touch the key of the desired resolution.
PRESS [START] TO SCAN ORIGINAL.
SCAN TO HDD
AUTO
EXPOSURE
RESOLUTION
AUTO
ORIGINAL
Select one of four resolution levels as appropriate
for the original.
The selected resolution key is highlighted.
13 Touch the [OK] key.
OK
HALF TONE
14 Touch the [EXPOSURE] key.
AUTO
EXPOSURE
300x300dpi
RESOLUTION
AUTO
ORIGINAL
15 Select [AUTO] or [MANUAL].
AUTO MANUAL
AUTO MANUAL
OK
200x200dpi
300x300dpi
HALF TONE
400x400dpi
600x600dpi
You will return to the
screen of step 11.
To have the exposure
adjusted automatically,
select [AUTO].
If you selected
[MANUAL], touch the
or key to adjust
the exposure.
(For a darker image, touch
the key. For a lighter
image, touch the key.)
SAVING A DOCUMENT IMAGE FILE
16 Touch the [OK] key.
OK
MANUAL
Place the original and touch the [START]
17
key.
[Placing the original]
For information on placing the original, see
"NORMAL COPYING" in chapter 4.
If you selected the "Card Shot" special function,
the document glass must be used.
If you selected job build mode, the automatic
document feeder must be used.
NOTE
This completes the scan save procedure. Follow the
steps below when you wish to call up the image and
print or transmit it.
18 The saved image can be called up using
the file name, folder name, or user name,
or from the filing folder.
To call up the image by entering the file name,
folder name, or user name, see "Searching
for and calling up a saved file" on page 7-13.
To call up the image from the filing folder, see
"Calling up and using a saved file" on page 7-
15.
19 The following
performed on the image that was called up
in step 18:
Print the image (page 7-16)
Transmit the image (page 7-17)
Change the attribute (page 7-18)
Move the image (page 7-19)
Delete the image (page 7-19)
Check details on the image (page 7-19)
You will return to the
screen of step 14.
Scanning begins.
If you are using the
document glass, touch
the [READ-END] key
after all pages have
been scanned.
operations can be
7-11
7