Download Print this page
Frigidaire GALLERY GL30WC41EB Instructions Manual
Frigidaire GALLERY GL30WC41EB Instructions Manual

Frigidaire GALLERY GL30WC41EB Instructions Manual

Professional / gallery series models

Advertisement

Quick Links

Patent
No.: US D450, 829 S
PROFESSIONAL
SERIES
MODELS
PL30WC41EC
PL36WC41EC
GALLERY
SERIES MODELS
GL30WC41ES
GL36WC41ES
GL30WC41EB
GL36WC41EB
FOR DOMESTIC COOKING ONLY
WARNING
CAUTION
TO REDUCE THE RiSK OF FIRE, ELECTRIC
SHOCK, OR iNJURY TO
PERSONS,
OBSERVE THE FOLLOWING:
I. Use this unit only in the manner intended by the manufacturer.
If you
have questions, contact the manufacturer
at the address or telephone
number listed in the warranty.
2. Before servicing or cleaning unit, switch power off at service panel and
lock the service disconnecting
means to prevent power from being
switched on accidentally.
When the service disconnecting
means can-
not be locked, securely fasten a prominent warning device, such as a
tag, to the service panel.
3. Installation
work and electrical
wiring
must be done by a qualified
person(s)
in accordance
with all applicable
codes and standards,
in-
cluding fire-rated construction
codes and standards.
4. Sufficient air is needed for proper combustion and exhausting of gases
through
the flue (chimney)
of fuel burning
equipment
to prevent
backdrafting.
Follow the heating equipment
manufacturer's
guideline
and safety standards such as those published by the National Fire Pro-
tection Association
(NFPA), and the American
Society of Heating, Re-
frigeration and Air Conditioning Engineers (ASHRAE), and the local code
authorities.
5. When cutting or drilling into watt or ceiling, do net damage electrical
wiring and other hidden utilities.
6. To reduce the risk of fire or electric shock, do not use this range hood
with an additional speed control device.
7. Ducted fans must always be vented to the outdoors.
8. To reduce the risk of fire, use only metal ductwork.
9. Use with approved cord-connection
kit only.
I0. This unit must be grounded.
TO REDUCE THE RiSK OF A RANGE TOP GREASE FIRE:
I. Never leave surface units unattended at high settings. Boilovers cause
smoking and greasy spitlovers that may ignite. Heat oils slowly on tow or
medium settings.
2. Always turn hood ON when cooking at high heat or when cooking flaming
foods.
3. Clean ventilating
fans frequently.
Grease
should not be allowed to
accumulate on fan or filter.
4. Use proper pan size. Always use cookware appropriate for the size of
the surface element.
TO REDUCE THE RISK OF iNJURY TO PERSONS iN THE EVENT OF A
RANGE TOP GREASE
FIRE, OBSERVE THE FOLLOWING:*
1. SMOTHER FLAMES with a close-fitting
lid, cookie sheet, or metal tray,
then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the
flames do not go out immediately,
EVACUATE AND CALL THE FIRE
DEPARTMENT.
2. NEVER PICK UP A FLAMING PAN -- You may be burned.
3. DO NOT USE WATER, including wet dishcloths or towels - violent steam
explosion will result.
4. Use an extinguisher ONLY if:
A.
You know you have a Class ABC extinguisher
and you already
know how to operate it.
B.
The fire is small and contained
in the area where it started.
C. The fire department
is being called.
D. You can fight the fire with your back to an exit.
* Based on "Kitchen Fire Safety Tips" published by NFPA.
1. For general ventilating
use only. Do not use to exhaust hazardous or
explosive materials and vapors.
2. To avoid motor bearing damage and noisy and/or unbalanced
impel-
lers, keep drywall spray, construction dust, etc. off power unit.
3. For best capture of cooking impurities,
your range hood should
be
mounted so that the top of the hood is 24-30" above the cooking sur-
face.
4. Please read specification
label on product for further information
and
requirements.
Installer:
Leave this manual with
the homeowner.
Homeowner:
Operating
and
Cleaning
information
on page 6.
If hood is to be installed Non-Ducted:
• Purchase a set of (2) non-ducted filters from your
local distributor or retailer and attach them to the
aluminum mesh filters.
TABLE OF CONTENTS
This manual is divided into sections as follows:
"PREPARE
HOOD
LOCATION"
Run ductwork from roof or wall cap, and electrical wiring from service
panel - to installation location
"PREPARE
THE HOOD"
Get your hood ready for installation
"CONNECT
WIRING"
Make electrical wiring connections
to hood
"iNSTALL
HOOD"
Secure hood to cabinet and ductwork - install bulbs and filters
"OPERATION"
How to use the hood controls
"CLEANING"
Keep your hood in top working condition
"SERVICE
PARTS"
Key numbers and exploded view of hood components
"WARRANTY"
One-year limited warranty and how to contact us

Advertisement

loading

Summary of Contents for Frigidaire GALLERY GL30WC41EB

  • Page 1 PROFESSIONAL SERIES MODELS PL30WC41EC PL36WC41EC GALLERY SERIES MODELS GL30WC41ES GL36WC41ES GL30WC41EB GL36WC41EB Patent No.: US D450, 829 S FOR DOMESTIC COOKING ONLY WARNING CAUTION TO REDUCE THE RiSK OF FIRE, ELECTRIC SHOCK, OR iNJURY TO 1. For general ventilating use only. Do not use to exhaust hazardous or PERSONS, OBSERVE THE FOLLOWING: explosive materials and vapors.
  • Page 2 PREPARE HOOD LOCATION PREPARE HOOD LOCATION ROOF CAP 31A '' X 10" or 7" ROUND 7" ROUND DUCT HOOD MOUNTING SCREWS 1315/16'' (30" hood) _ VERTICAL DUCTING (For vertical 16t5/t6" (36" hood) 1315/16" (30" hood) ----_ -,t----- 1 615/16 '' (36" hood) CABINET __-_ 7½""-"_...
  • Page 3 PREPARE THE HOOD PREPARE THE HOOD Remove Remove Chute - held in Teflon<_-coated bottom cover place with one AIR CHUTE from hood. (1) screw. cover and mounting NOTE: aside. careful not to disconnect Teflon ® is a registerec wires. trademark of DuPont.
  • Page 4 PREPARE THE HOOD PREPARE THE HOOD TAPE TOP/BACK TOP RECTANGULAR UP TO 1" EDGE DUCT KNOCKOUT SEMI-CIRCULAR SIDE-TO-SIDE (Remove for 3_" x 10" DUCT KNOCKOUT Vertical & for 7" Round (Remove for 7" Round Discharge) DAMPER/ DUCT CONNECTOR (Vertical discharge REAR position shown)
  • Page 5 CONNECT WIRING INSTALL HOOD WARNING: To reduce the risk of electric shock, make sure power is switched off at the service panel. Lock ortag service panel to prevent power from being switched on accidentally. HOUSE WIRING (120 VAC) KEYHOLE MOUNTING SCREW Hang hood from (4) Mounting Screws.
  • Page 6 NON-DUCTED FILTERS OPERATION If hood is to be installed Non-Ducted: Purchase a set of (2) Non-Ducted Filters from your local distributor or retailer and attach them to the aluminum mesh filters. Fan and Lights: 3 push button switches for each. Push any button to select one of 3 fan speeds...
  • Page 7 SERVICE PARTS KEY NO. DESCRiPTiON °/ 7" Round Duct Plate (includes hardware) Damper/Duct Connector (includes hardware) Screw, #8-18 x % Hex* (2 in package) Motor Capacitor (includes wire nuts & hardware) Isolation Transformer Nameplate Control Panel (includes Key No. 6 & hardware) Screw for Plastic, #6 x ½...
  • Page 8 Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed,...

This manual is also suitable for:

Gallery gl30wc41esProfessional pl30wc41ecGallery gl36wc41esGallery gl36wc41ebProfessional pl36wc41ec