Operation - Craftsman 536.773520 Operating Instructions Manual

OPERATION
KNOW YOUR TRIMMER
READ THE OWNER'S MANUAL AND ALL SAFETY RULES BEFORE YOU OPERATE the trim-
mer, To familiarize yourself with the location of the controls, compare the illustrations with your trim-
mer. Save this manual for future reference,
Control Bail
Trimmer Head Drive Lever
Handle
Ignition Switch
Throttle Control Lever
Recoil Starter Handle
Fuel Cap
Engine Debris Shield
Handle Adjustment Knob
Dipstick
Trimmer Head
Shield Edge Guard _"
Figure5
Trimmer Head Drive Lever - Engages
the rotation of the trimmer head.
Control Ball
- Release to stop the rotation
of the trimmer head.
Throttle Control
Lever
- Controls the
speed or stops the engine.
Primer Button
- Injects fuel directty into the
carburetor manifold for fester starts. See
Figure 8.
Recoil Starter Handle - The engine is
equippedwith an easy pull recoil starter.
Ignition Switch - Use on key-start engine.
Shield Edge Guard - Protects the shield
by automaticallycuttingthe line to the correct
length.
Engine Debris Shield - Protects the en-
gine from debris. Can be easily removed to
service the engine.
EYE PROTECTION
WARNING: Debris thrown from
the trimmer can resuR in foreign
objects being thrown into the
eyes, which can cause severe
eye damage. Always wear safety
glasses or eye shields when op-
erating the trimmer.
Always wear safety glasses. If you wear eye
glasses, put a Wide Vision Safety Mask over
your eye glasses.
712344
HOW TO STOP
THE TRIMMER HEAD
1. Release tl_e control bell. It will return to its
open position and disengage the trimmer
head,
HOW TO STOP THE ENGINE
1. Move the throttle control lever com-
pletely back to the STOP position,
9