Advertisement
How
1
2
4
5
to
change
ice sizes
Press the CUBES key once to enable cube function.
Press CUBES key a second time to adjust cube size.
Small is the default.
Use the plus (+) and minus (-) keys to scroll
through small, medium, and large cube sizes.
Press the plus (+) key once to select medium ice
cubes.
Press the plus (+) key again to select large ice
cubes.
The screen will return to standby mode when
another function is selected or after 10 seconds of
no user activity. The display will stay in the CUBES
function.
maker/dispenser
tips
If your refrigerator is not connected to a water
supply or the water supply is turned off, turn off
the ice maker by holding the On/Off
soft-touch
icon and the water shut-off valve for three (3)
seconds.
o The following sounds are normal when the ice
maker is operating:
- Motor running
- Ice dropping into ice bin
- Water valve opening or closing
- Running water
-
When dispensing ice, you will hear a snapping or
clicking sound when the ice chute opens and closes.
-
If you need a large quantity of ice at one time, it is
best to get cubes directly from the ice bin.
-
Ice cubes stored too long may develop an odd
flavor. Empty the ice bin as explained below.
•
When dispensing cubed ice, it is normal to have a small
quantity of little pieces along with the whole cubes.
If the water supply to your refrigerator is softened, be
sure the softener is properly maintained.
Chemicals
from a water softener can damage the ice maker.
Cleaning
the
ice
maker
Clean the ice maker and
ice bin at regular intervals,
especially prior to vacation or
moving.
1
Turn off the ice maker.
2
Remove the ice bin by
pulling straight out.
Removing
Ice Bin
3
Empty and carefully clean the ice bin with mild
detergent.
Do not use harsh or abrasive cleaners.
Rinse with clear water.
4
Allow the ice bin to dry completely before replacing
in the freezer.
5
Replace the ice bin. Turn the ice maker on.
Remove and empty the ice bin if:
An extended power failure (one hour or longer)
causes ice cubes in the ice bin to melt and freeze
together, jamming the dispenser mechanism.
You do not use the ice dispenser frequently. Ice
cubes will freeze together in the bin, jamming the
dispenser mechanism.
Remove the ice bin and shake to loosen the cubes or
clean as explained above.
NEVER use an ice pick or similar sharp instrument to
break up the ice. This could damage the ice bin and
dispenser
mechanism.
To loosen stuck ice, use warm water.
Before replacing
When removing or replacing the ice bin, DO NOT
rotate the auger in the ice bin. If the auger is
accidentally rotated, you must realign the auger by
turning it in 90 degree turns (see below) until the ice
bin fits into place with the drive mechanism. If the
auger is not properly aligned when replacing the ice
bin, the refrigerator will produce no ice. The fresh food
door also may not close properly causing warm air to
leak into the flesh food compartment.
Adjusting
Ice Bin Auger
Advertisement
