Craftsman 3One 917.372823 Owner's Manual page 7

ASSEIVIBLY
TO ASSEMBLE AND ATTACH GRASS
CATCHER (See Figs. 3A thru 4)
,, insert leg of tubular frame through front opening of
grass catcher and thread frame into sewn hem of bag_
NOTE: Keep bag hem gathered on the straight leg of the
tubular frame,
• When frame comes out the other end of sewn hem,
immediately _!ork the end of frame down inside the bag
as shown in inseL
• Slide sewn hem evenly around the tubular irame until
both ends of frame are exposed out Ofthe front open-
ing_
- Assemble lower frame to tubulaF frame as shown_ Be
sure handle is outside of bag and frames are fully
seated as shown in JnseL
• Slip vinyl bindings over frame..
NOTE: If vinyl bindings are too stiff, hold them in warm
water for a few minutds. If bag gets wet, let il dry before
using.
• Close the flip lid. Flip lid must be closed white operating
lawn mower.
• Lift the rear door on the mower housing and place the
grass catcher frame onto the formed tabs on the rear
door hinge brackeL
° The grass catcher is secured to the lawn mower
housing wl_en the rear door is lowered onto the grass
catcher frame,, '
CAUTION; DOnot run your lawn mower !
without clipping deflector or approved
grass catcher in place. Never attempt
to operate the lawn mower with the rear
door removed or propped open,
TUBULAR FRAME SEWN
FLIP LID
SEWN HEM
FIG. 3B
LOWER FRAME HANDLE
\
FIG. 30
DOOR
BRACKET
FORMED
TAB'S
GRASS
CATCHER
FRAME
. FIG. 4
FiG. 3A
7