Eureka 160 Series Owner's Manual page 7

Lightweight vacuum cleaner household type

Hide thumbs Also See for 160 Series:

HOW TO MAINTAIN

The instructions in this booklet serve as a guide to routine maintenance. To keep the

cleaner operating at top efficiency empty the dust cup and clean the filter after each use.

Empty Dust Cup

NOTE: Turn off the power switch and unplug the electrical cord to service.

1. Slide dust cup latch up.

2. Pull dust cup from handle section and lift

from the nozzle.

5. To replace dust cup, fit dust cup down

into nozzle.

6. Gently squeeze the sections together

until the dust cup latch locks the cup in

place.

Dust Cup Latch

3. Pull filter out of dust cup.

4. Shake and brush the dust and dirt from

filter into waste container. (To clean filter

refer to dust cup filter section.)

Table of Contents

Show Quick Links