Page 1
Vendor Vendor Vendor Vendor Item Item Item Item # # # # F F F F E0047BA E0047BA E0047BA E0047BA KSN:02650394-6 KSN:02650394-6 KSN:02650394-6 KSN:02650394-6 Description: Description: Green Green Glazed Glazed Fountain Fountain Description: Description: Green Green Glazed Glazed Pot Pot Fountain Fountain Questions, Problems, Missing Parts? Before returning to your retailer, PLEASE...
Page 2
ASSEMBLY ASSEMBLY ASSEMBLY ASSEMBLY INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS Unpack the contents of the box and check to make sure that all items are accounted for and in good condition. Select a flat, level surface for the assembly and final location of your fountain. Place the basin on a flat, level surface.
Page 3
8. Disassemble the pump by removing the filter and regulator/impeller plate. Remove the impeller/rotor assembly by gently pulling on the impeller blades. Use a soft cloth or brush to clean the area inside of the pump housing. Clean the filter, gland and impeller in warm soapy water. Reassemble the pump and inspect for proper operation.
Page 4
If the water starts to foam… 1. Check the water level to ensure the pump is completely submerged. If the water level drops below the pump intake, it may suck in air and cause the pump to ‘spit’ and foam the water. 2.
Need help?
Do you have a question about the FE0047BA and is the answer not in the manual?
Questions and answers
What is the small green plastic insert, which is inside the water supply tube?