Advertisement
The Doors
To removethe freezerdoor:
1
Detach the multi-wire
cable connector
located above the top hinge,
Grasp both sides of the connector
firmly and pull apart.
2
Trace lightly around the hinge with a pencil,
This makes reinstallation
easier.
f P_'eS80Mtelt
8_eeV_
!iii
_i
2 pull to reraove
tube
TO CONNECT
teaches
face of ¢;onnecto_-
3
Detach the water tube from the connector
located below the freezer
door. The connector
releases
when you press its outer sleeve inward.
4
Remove
the screws from the top hinge and
pull the multi-wire
cable through
it. Lift the
door off of the bottom
hinge.
Wa_er
Assembly
5
Remove
the three bottom
hinge screws and hinge if necessary.
6
Lay the door on its side to avoid damage
to the water tube extending
from the bottom
hinge.
To reinstall
the freezer door, reverse
the above steps. Once both doors
are in place, also replace
the top hinge cover (see Page 7).
Advertisement
