Table of Contents
Advertisement
PAGE 102
Calibrating the Touch Panel
To obtain the maximum performance form the ETP-1500 Touch Panel, the main user should
calibrate the display using the Calibration tool.
Follow these steps to calibrate the ETP-1500 Touch Panel:
1. Press the SETUP key on the remote control.
2. Select the External Control Menu.
3. Select the Touch Panel Menu.
4. Select the Calibration Menu.
5. The calibration screen is displayed.
6. Follow the on screen instructions, by touching the moving target with your finger.
When the calibration procedure is complete, you can operate the FireBall by touching the buttons
around the perimeter of the screen. Although these buttons duplicate the functionality of the
FireBall remote, you can still use the wireless IR remote and Escient keyboard even when the ETP-
1500 is in use.
Advertisement
Table of Contents
