Sending And Receiving Fax And Data Calls - Ericsson T28z User Manual

Sending and Receiving
Fax and Data Calls
Note! To be able to use various communications services you need the
appropriate software such as a fax program, an e-mail program or an
Internet browser.
Sending Fax and Data Calls
All fax and data calls are initiated from the appropriate computer software.
To send fax and data calls you need to connect your phone to a computer,
for example by means of an infrared modem and then start the appropriate
software program.
Receiving Fax and Data Calls
The procedure of receiving fax and data calls depends on your network and
subscription. If you have different numbers for voice, fax and data calls, this is
referred to as multi numbering. This means that you can have up to three
numbers in your subscription. If you only have one number for all call types,
this is referred to as single numbering.
Receiving Fax and Data Calls – Multi Numbering
If your network and subscription support multi numbering, the type of
incoming call is shown in the display. There are two possible calls apart from
voice calls:
• Fax calls
• Data calls
The display shows the type of call.
To receive a fax or data call
1. Connect your computer to the phone.
2. Answer the call from within the software program (if it does not answer
automatically).
Note! You cannot answer an incoming fax or data call by pressing the
key on the phone but you may reject the call by pressing

Sending and Receiving Fax and Data Calls

Y E S
.
N O
81