Panasonic Lumix DMC-FX78 Owner's Manual page 66

Others
• When the brightness changes due to zoom or camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
• If you do not use the camera for a long time, the clock may be reset.
[Please set the clock] message will be displayed; please re-set the clock. (P16)
• It is possible that the subject may be warped slightly, or the borders get colored, depending on
the zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
• When using the Extended Optical Zoom or the Intelligent Zoom, the zooming action will stop
temporarily. This is not a malfunction.
• Is the camera set to Macro Zoom Mode? (P81)
Maximum zoom during Macro Zoom Mode is 3× Digital Zoom.
• When you perform an operation after taking a certain action, the pictures may be recorded in
folders with different numbers from the ones used prior to the operation.
• If the battery was inserted or removed without first turning the camera's power off, the folder
and file numbers for the pictures taken will not be stored in the memory. When the power is
then turned back on and pictures are taken, they may be stored under file numbers which
should have been assigned to previous pictures.
• Perform the calibration (P45).
• This is [Auto Demo] to introduce the features of this unit.
-154-