Others
use the cords
and the cables
supplied
About this unit
with
them.
Do not extend
the cords
and the cables.
The unit and the SD card become
warm
during
use. This is not a
malfunction.
Keep this
unit
as far away as possible
from
electromagnetic
equipment
(such
as microwave
ovens,
TVs, video
games
etc.).
• if you use this unit on top of or near a TV,
the pictures
and/or sound on this unit may
be disrupted
by electromagnetic
wave
radiation.
• Do not use this unit near cell phones
because
doing so may result in noise
adversely
affecting
the pictures
and/or
sound.
• Recorded
data may be damaged,
or
pictures
may be distorted,
by strong
magnetic
fields created
by speakers
or
large motors.
• Electromagneticwave
radiation
generated
by microprocessors
may adversely
affect
this unit, disturbing
the pictures
and/or
sound.
• If this unit is adversely
affected
by
electromagnetic
equipment
and stops
functioning
properly,
turn this unit off and
remove the battery
or disconnect
AC
adaptor.
Then
reinsert
the battery
or
reconnect
AC adaptor
and turn this unit
on.
Do not use this unit near radio
transmitters
or high-voltage
lines.
• if you record near radio transmitters
or
high-voltage
lines, the recorded
pictures
and/or
sound may be adversely
affected.
Make sure
to use the supplied
cords
and
cables.
If you
use optional
accessories,
Do not spray
insecticides
or volatile
chemicals
onto
the unit.
• If the unit is sprayed
with such chemicals,
its body may be marred and the surface
finish may peel off.
• Do not leave rubber
or plastic products
in
contact
with the unit for a long time.
When
you
use the unit in a sandy
or
dusty
place
such
as a beach,
do not let
sand or fine
dust get into the body
and
terminals
of the unit.
Also,
keep the unit
away from
sea water.
• Sand or dust may damage
the unit. (Care
should
be taken
when inserting
and
removing
a card.)
• If sea water
splashes
onto the unit, wipe
off the water
with a well wrung cloth. Then
wipe the unit again with a dry cloth.
When
carrying
the unit, do not drop or
bump
it.
• A strong
impact
can break the unit's
casing,
causing
it to malfunction.
Cleaning
• Before
cleaning,
detach the battery
or pull
the AC cable from the AC outlet, and then
wipe the unit with a soft, dry cloth.
• If the unit is very dirty, dip a cloth in water
and squeeze
firmly, and then wipe the unit
with the damp cloth. Next, dry the unit with
a dry cloth.
• Use of benzine,
paint thinner,
alcohol,
or
dishwashing
liquid may alter the camera
body or peel the surface
finish.
Do not use
these solvents.
• When
using a chemical
dust cloth, follow
the instructions
that came with the cloth.
134
VQT3J15