Use this procedure when changing the channel setup or
changing the channel display.
Also, use this to add or skip channels from the channel list
manually.
You can select a channel tuning mode (Digital only/Analog
only) in "Channel surf mode"(p. 48)
_0 Select "Edit"
Select the item to edit
Favorite
Caption
Add
R
G
Proceed
to
_next
page
Go back to the previous
page
** Caption:
Changes
the station
identifier
** Favorite:
Registers
channels
to the
Favorite
List
** Add:
Adds
or skips channels
_3}Edit
Q Caption
Select or edit the station identifier.
(maximum 7 characters available)
RETURN
® Favorite
select
RETURN
i
@
set
I Set favorite I Select the number
® Add
RETURN
Press OK to select "Yes (add)" or "No (skip)"
@
_4} Move
the cursor
to a channel
number
@ Select "Apply"
To cancel the Edit
Check the signal strength if interference is found or freezing occurs on a digital image.
_
_
or
_}change
channel
@}OK
intensity
® If the signal is weak, check the antenna.
If no problem is found, consult your local dealer.
® Not available if "Cable" is selected in "ANT in" (see p. 42).
6_Available only for digital antenna channels.
®
m
Q_
o3
£
©
(D
Oo
43