Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. LCD TV
  5. DT50 series
  6. Ehelp

Panasonic DT50 series Ehelp

Hide thumbs Also See for DT50 series:

Advertisement

Quick Links

Download this manual See also: Owner's Manual, Ehelp
DT50
series
M0212-0

Advertisement

loading

Related Manuals for Panasonic DT50 series

Summary of Contents for Panasonic DT50 series

  • Page 1 DT50 series M0212-0...
  • Page 2 All settings Picture Setting menu Adjust the image or picture quality. • Some menus are grayed out depending on the input signal or condition. (e.g. will be grayed out if the aspect is not set to ZOOM.) Display menu M EN U I 2, Select from menu...
  • Page 3 All settings Picture Basic settings IMENUI > Reset to • Resets all picture adjustments to factory defaults default settings except for advanced settings. Picture mode Vivid/ ° Adjusts the picture quality according to ambient Standard/ lighting conditions or situation. Cinema/ °...
  • Page 4 All settings Picture Basic settings LMENUJ > Cool/ Color temp. • Selects color temperature preference, from Normal/ "cool" (bluish) to "warm" (reddish) or normal. Warm Off/On Color mgmt. • On: Enhances green and blue color reproduction, especially outdoor scenes. Off/On A.
  • Page 5 All settings Picture Aspect adjustments IMENUI > > Screen format FULL/H-FILL/ • Changes the format (aspect ratio). Lets you JUST/4:3/ choose the aspect depending on the format of ZOOM received signal. HD size Size l/Size • Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning area with High Definition signal.
  • Page 6 All settings Picture PC adjustments > > L_ IMENU Reset to • Resets all PC adjustments to factory default defaults settings. H&V Sync • The H and V sync signals are input from the H D/VD connector. On green • Uses a synchronized signal on the Video G signal, which is input from the G connector.
  • Page 7 All settings Picture PC adjustments IMENUI > > Clock phase • Alleviates the problem if the whole picture appears to flicker or is blurred. First adjust the Dot Clock to get the best possible picture, then adjust the Clock phase so that a clear picture appears. •...
  • Page 8 All settings Picture HDMI settings IMENUI > > HDMI/DVI • Prevents the blown out highlights and blocked Standard RGB range up shadows when a wide-range signal is received. (HDMI) (16-235)/ Selects between standard RGB range (16-235 Nonstandard bits) or non-compliance (0-255 bits).
  • Page 9 All settings Picture Advanced picture IMENUI > > 3D Y/C filter Off/On • Minimizes rough edges (dot crawl) in the picture from a composite source. Color matrix SD/HD ° Selects image resolution of component- connected devices. ° SD: Standard Definition HD: High Definition °...
  • Page 10 All settings Picture Advanced picture IMENUI > > Black level • Select Dark when details are washed out in Light/Dark dark areas of picture from external source. Valid only for external input signals. Off/On/Auto 3:2 pulldown ° Reduces motion jitter in film-based content by transforming 24 fps to 30 fps (non-HDMI).
  • Page 11 All settings Audio Setting menu Adjust audio quality. Display menu M EN U I 2. Select from menu Select desired menu using _ / V from menu bar and press 3, Select item and adjust Select desired item using _ / V and adjust with _ / Shows the functions that can be adjusted.
  • Page 12 All settings Audio Basic settings IMENUI > Reset to • Resets Bass, Treble, and Balance adjustments defaults to factory default settings. Bass • Increases or decreases the bass response. Treble • Increases or decreases the treble response. Balance ° Emphasizes the left / right speaker volume.
  • Page 13 All settings Audio Advanced audio [MENUJ > > A.I. sound Off/On • Equalizes overall volume levels across all channels and external inputs. Surround Off/On • Enhances audio L/R response when listening to stereo. Ideal for music and action movies. Volume leveler °...
  • Page 14 All settings Audio language settings IMENUI > > Selected preferred language is used for automatic Preferred English/ selection of audio service. language Spanish/ French Preferred audio Main Audio/ Selected preferred audio type is used for automatic selection of audio service. type Hearing Impaired/...
  • Page 15 All settings Audio DIGITAL AUDIO terminal You can enjoy your Home Theater by connecting a Dolby Digital (5.1 channel) decoder and "Multi Channel" amplifier to the DIGITAL AUDIO OUT terminals. • Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output.
  • Page 16 All settings Network Network settings IMENUI > Connection test • Checks for proper network connection, settings and communication to the Internet & server. Network Ethernet • Select Network type. connection cable/Wireless (WiFi)
  • Page 17 All settings Network Network settings IMENUI > Wireless • This setting is performed only when "Wireless network (WiFi)" is selected settings • Select the Access point from the list or select Connection method with color key. • Follow the directions on screen to complete the setting.
  • Page 18 All settings Network Network settings IMENUI > IP address/ IP setting • Select mode/ DNS settings and set to Automatic, then each IP IP address/ address is acquired Automatically. Subnet mask/ [Manual setting] Default • Select _ _::'_::/©_i gateway/ and set to Manual, then select item and DNS setting press OK.
  • Page 19 All settings Network Network settings IMENUI > Network link Vl ERA • Sets your favorite name for this TV. This name network name (Stream and be displayed on the screen of the other control content Network compatible equipment. from networked DLNA remote •...
  • Page 20 All settings Network Network settings IMENUI > Software • Press OK to start the Software update screen. update And follow directions on the screen. • Set first. New software Off/On • On: When TV is turned On, update message notice displayed if available.
  • Page 21 All settings Timer Setting menu The TV can automatically turn On/Off at a designated date and time. If the Timer settings are grayed out, first set the clock and make sure ::_::_ :_,:: is set to No. Display menu I M E N U I 2.
  • Page 22 All settings Timer Sleep (Off timer) MENU > Off/15/30/ Sleep • Selects how long the TV stays on before it 60/90 (minutes)
  • Page 23 All settings Timer Timer (On/Off timer) MENU > Timer set Off/On • Enables or disables the Timer. Inputs . Sets the input to select when the TV turns on. Channel ° Sets the channel to select when the TV turns °...
  • Page 24 All settings Lock (parental control) Setting menu Locks specified channels or shows to prevent children from watching objectionable content. You will be asked to enter your password each time you display the Lock menu. Set Custom to specifyC_ _ ::__,,_i_, _:;, settings.

  • Page 25: All Settings

    All settings Lock (parental control) Lock I MENUI > Mode Off/All/Custom • Locks (All) or Unlocks (Off) all channels, programs or inputs. For Custom, Locks specified inputs of©::_:::i,_:_i _:::, Channel Mode • Locks (All) or Unlocks (Off) all channels. (These (Off/All/ Custom, Locks specified...
  • Page 26 All settings Lock (parental control) Lock M EN U [ > Mode Program • Sets program lock status. (Off/On) "V-chip" (Prohibits technology enables restricted shows to lock viewing of TV according to TV ratings. On: Set each rating level content based (MPAA, US.TV, C.E.L.R., C.F.L.R.)
  • Page 27 All settings Lock (parental control) Password setting You need to enter the password when you access locked channels or inputs. (Input your 4-digit password) If it is your first time entering the password, enter the password twice in order to register it.
  • Page 28 All settings Lock (parental control) Parental control ratings "V-chip" technology enables you to lock channels or shows according to standard ratings set by the entertainment industry. • U.S. MOVIE RATINGS (MPAA) • U.S. TV PROGRAMS RATINGS (U. S. TV)- Age-Based Ratings Not Rated.
  • Page 29 All settings Lock (parental control) Parental control ratings • • CANADIAN ENGLISH RATINGS CANADIAN FRENCH RATINGS (C. E. L. R.) (C. F. L. R.) Exempt programming. Exempt programming. All children. General programming. Not recommended Children 8 years and older. young children. General programming.
  • Page 30 All settings Lock (parental control) Parental control ratings Caution The V-Chip system used in this set is capable of blocking "NR" programs (non rated, not applicable and none) as per FCC Rules Section15.120(e)(2). If the option of blocking "NR" programs is chosen "unexpected and possibly confusing...
  • Page 31 All settings Setup Setting menu Other functions settings Display menu I MENUI 2. Select from menu Select desired menu using _ / V from menu bar and press 3, Select item and adjust Select desired item using _ / V and adjust with _ / Shows the functions that can be adjusted.
  • Page 32 All settings Setup settings IMENUI > > Auto detect 3D Off/Auto • Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D), AVCHD file, etc.) ° Auto 2: Same as Auto 1. Also detects 3D signal by identifying similar image in side-by-side or top- and-bottom...
  • Page 33 All settings Setup settings IMENUI > > Off/On 3D adjustment • Changes 3D depth by adjusting left-right parallax. Set to On to adjust (-3 to +3). Normal/ Left/Right swap • Change this to Swapped when the phases Swapped are reversed (When there is an unusual sense of depth).
  • Page 34 All settings Setup ANT/Cable setup IMENUI > > ANT in Cable/ • Select desired signal type to scan or edit. Antenna/ Not used: Following channel settings are not Not used available All channels/ Auto program • Select scan type and press OK to start Analog only/ scanning automatically.
  • Page 35 All settings Setup ANT/Cable setup IMENUI > > Signal meter • Check the signal strength if interference or freezing occurs on a digital image. • If the signal is weak, check the antenna. If you cannot figure out the problem, consult your local dealer.
  • Page 36 All settings Setup Closed caption IMENUI > > Reset to • Resets all Closed caption settings to factory defaults default settings. Mode Off/On/ • On: To display Closed captions. CC on mute • CC on mute: To display Closed captions when the audio is muted.
  • Page 37 All settings Setup Closed caption IMENUI > > Digital • The Digital Closed caption menu lets you Primary/ Second./ configure the way you choose to view the digital Service 3/4/5/6 captioning. Size • Select the text size Digital setting (Set display Font °...
  • Page 38 All settings Setup Closed caption notice • For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3, characters might be cut off). ° The CC can be displayed on the TV only when the receiver (such as a Cable box or satellite receiver) has the CC set to ON within the device itself.
  • Page 39 All settings Setup VIERA Link settings IMENUI > > VIERA Link Off/On • To use all VIERA Link functions, set to On after everything is connected. Power on link No/Yes • Yes: The TV is turned on automatically switches to the appropriate HDMI input whenever VIERA Link compatible...
  • Page 40 All settings Setup VIERA Link settings IMENUI > > Quick start/ Energy saving • Quick Start: When TV is turned off, all mode Save connected VIERA Link compatible equipment moved to ECO Standby mode* automatically under these conditions. • Power off link:(Yes). The connected equipment has "HDAVI Control 4 or later (with...
  • Page 41 All settings Setup ECO/energy saving IMENUI > > Power save Standard/ • Reduces screen brightness to lower power Saving consumption. Eye-friendly for viewing in a dark room. No signal for Stay on/ • To conserve energy, the TV automatically turns 10 minutes Power TV off off when NO SIGNAL...
  • Page 42 All settings Setup ECO/energy saving IMENUI > > No activity for Stay on/ • To conserve energy, the TV automatically turns 3 hours Power TV off off when no operation of remote and side panel key continues for more than 3 hours. •...
  • Page 43 SD cards automatically. Videos/Music/ • Set later: menu will Set later/Off be displayed repeatedly. Vl ERA Off/On • Sets the banner display status. Connect Banner Off/On Panasonic logo • Lights the font LED of Panasonic logo while the is on. light...
  • Page 44 All settings Setup Other settings IMENUI > Channel surf All/Favorite/ • Sets the mode to select the channel with the mode Digital only/ Channel up/down button. Analog only Favorite: Only channels registered FAVORITE. Language English/ • Selects the screen menu language. Espa_ol/ Fran_;ais Clock...
  • Page 45 All settings Setup Other settings IMENUI > Keyboard type • Selects the country/region of the keyboard connected to this TV. (U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin America)/Spanish (Spain)) First time setup ° Launches First time setup wizard. Repeats the initial step-by-step TV setup.
  • Page 46 If there is a problem with your TV, please refer to the table below to determine symptoms, then carry out the suggested check. If this does not solve the problem, visit the Panasonic website for further assistance. How do I view the picture • Press the I INPUT...
  • Page 47 Support / FAQ Picture - Snowy / none Why is there no picture or • Check if the power cord is plugged in and the TV is just a blue, black or snowy turned on (front red LED light should be on;...
  • Page 48 Support / FAQ Picture - Distortion The picture is distorted after • Ensure that the device is connected correctly with selecting the "Video/Comp." the supplied Component/AV adapter to the TV's input. What should I do? Video/Component green mini-connector. NOTE: One red connector is for video and the other is for audio.
  • Page 49 Support / FAQ Picture - Continue Why is there a black box on • Change settings of Closed caption (CC). the screen? Why do some small spots • The panel is made up of a few million pixels and is on the screen remain bright produced with advanced technology...
  • Page 50 Program) is selected by pressing the _ button on the remote control. • If the TV is connected to a Panasonic Home via HDMI cable, then check VIERA Link controls. • If the TV is connected to a Home Theater...
  • Page 51 Support / FAQ Sound - Unusual Why is the sound unusual, • Check that the correct :i/_ : _ ; (Secondary Audio distorted, low volume or in Program) is selected by pressing the _ button on the remote control. another language? •...
  • Page 52 TV? a speed of no less than 1.5 Mbps. 2. Connect the TV to the Internet through your router by an Ethernet cable or a Panasonic Wireless (built-in). 3. Run the under the menu. If Connection...
  • Page 53 Support / FAQ Software update How do I check for the latest • In the main menu, select_::;_: ::;,:.Select software (firmware) version The current version and latest for my TV? version software will be shown. If software update is grayed out, the TV is not connected to the Internet.
  • Page 54 Can I use 3D glasses similar ,, No. Movie theater's 3D glasses are passive. They to the kind given at a 3D use a simple filter 'lens'. Panasonic active shutter 3D movie theater to watch 3D Eyewear are actively...
  • Page 55 Support / FAQ - Format • There are a few different 3D formats and the When selecting some 3D Video content, why are there current setting may not match the incoming 3D signal. two pictures next to each The format should change automatically, other? depending on the source/connection...
  • Page 56 Support / FAQ Other What is the easiest and best • Use an HDMI cable. It carries both digital video and way to connect a High- audio signal in HD. HDMI cable is the only cable Definition Cable or Satellite needed to connect an HD device to the TV.
  • Page 57 Support / FAQ Menu - Gray-out Why is the • During i: i:: :: .::::: ::i,:_::: _:::: : :::_, you indicated option at the top of the that you are using Cable or menu Satellite box and the box is connected to one of the grayed-out and unable to be...
  • Page 58 Support / FAQ Reset to default How do I reset my TV to all • In the main menu, select i_,_;_:_ !_::_ _ ::_;. Highlight factory defaults and press _. Enter your password settings? created earlier) or create a temporary new password.

  • Page 59: Care And Cleaning

    Support / FAQ Care Cleaning Display panel First, unplug Power cord plug from the wall outlet. • Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.
  • Page 60 Support / FAQ Care Cleaning Cabinet First, unplug Power cord plug from the wall outlet. • Cabinet If the cabinet becomes dirty, wipe it with a soft, dry cloth. • If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the cloth dry.
  • Page 61 Support / FAQ Care Cleaning Pedestal / Power cord First, unplug Power cord plug from the wall outlet. • Pedestal • Cleaning Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small amount of mild liquid dish soap has been added and then wipe with a dry cloth.