Craftsman 917.28973 Operator's Manual page 9

.
FIRST INSTALL ANTI-SWAY BAR (S).
From rightside of mower, insertant-sway
bar into hole in transmission bracket (T).
Pivot bar towards you and insert other
end of bar into hole in rear mower
bracket (D). Move mower as needed
to insert bar.
Secure with washer and retainer spring
as shown.
8. ATTACH REAR LIFT LINKS (C) - Insert
rod end of link assembly into hole in tractor
lift shaft suspension arm and pivot link
down to mower. Lift rear corner of mower
and position slot in link assembly over pin
on rear mower bracket (D) and secure
with washer and retainer spring.
9. Repeat on opposite side of tractor.
10.Turn steering wheel to position wheels
straight forward.
6. ATTACH MOWER SIDE SUSPENSION
ARMS (A) TO CHASSIS - Position hole
in arm over pin (B) on outside of tractor
chassis and secure with retainer spring.
7. Repeat on opposite side of tractor.
11 .ATTACH FRONT LINK (E) - Work from
left side of tractor. Insert rod end of link
assembly through front hole in tractor
front suspension bracket (F) and secure
with retainer spring (G) through hole in
link located behind the bracket.
12. Insert other end of link (E)into hole in
front mower bracket (H) and secure with
washer and retainer spring (J).
13. Disengage belt tension rod (K)from lock-
ing bracket (L).
9