Craftsman 917.272955 Owner's Manual page 11

CHECK TIRE PRESSURE
The tires on your tractorwere ovennflated
at the factoryfor shippingpurposes.
Correcttire pressure is importantfor best
cutting performance.
• Reduce tire pressure to PSI shown in
"PRODUCT SPECIFICATIONS" section
of this manual.
CHECK MOWER LEVELNESS
For best cutting results,mower should be
propedyleveled. See =TO LEVEL MOWER
HOUSING" in the Service and Adjustments
section of this manual.
CHECK FOR PROPER POSITION OF ALL
BELTS
See the figuresthat are shown for replac-
ing motion, mower drive, and mower blade
drive belts in the Service and Adjustments
section of this manual. Verifythat the belts
are routed correctly.
CHECK BRAKE SYSTEM
After you learn how to operate your tractor,
check to see that the brake is properly
adjusted. See =TO ADJUST BRAKE" in the
Service and Adjustmentssection of this
manual.
_' CHECKLIST
Before you operate and enjoy your new
tractor, we wish to assure that you
receive the best performance and
satisfaction from this quality product.
Please review the following checklist:
/ All assembly instructions have been
completed.
/ No remaining loose parts in carton.
/ Battery is properly prepared and
charged.(Minimum 1 hour at 6 amps).
/ Seat is adjusted comfortably and
tightened securely.
/ All tires are properly inflated. (For
shipping purposes, the tires were
overinflated at the factory).
/ Be sure mower deck is properly
leveled side-to-side/front-to-rear for
best cutting results. (Tires must be
propedy inflated for leveling).
/ Check mower and drive belts. Be
sure they are routed properly around
pulleys and inside al} belt keepers.
/ Check wiring. See that all connec-
tions are still secure and wires are
properly clamped.
While learning how to use your tractor,
pay extra attention to the following
important items:
/Engine oil is at proper level.
/ Fuel tank is filled with fresh, clean,
regular unleaded gasoline.
/ Become familiar with all controls -
their location and function. Operate
them before you start the engine.
/ Be sure brake system is in safe
operating condition.
11