Controls - GE Profile 405 Owner's Manual

[] Never attempt to operate this appfiance if
it is damaged, malfimctioning, partially
disassembled, or' has missing or broken parts,
including a damaged cord or plug,
i The interior of the machine and the exhaust duct
connection inside the dryer should be cleaned at
least once a year by a qualified technidano See the
Loading and Using the Oryersecfion°
[] If yours is a gas dryer, it is equipped with an
automatic electric ignition and does not have a
pilot ligh_ DO NOTATTEMPT TOUGHT WITHA
MATCH_ Burns may result from ha_ng your hand
in the vicinity of the burner when the automatic
ignition w.rns on,
i You may wish to soften your laundered fabrics
or reduce the static electricity in them by using
a dryer-applied fabric softener or an anti-static
conditioner, We recommend you use either a
fabric softener in the wash cycle, according to
the manufacturer's instructions for those
products, or try a dryer-added product for
which the manufacturer gives written assurance
on the package that their product can be safely
used in your dryer. Service or performance
problems caused by use of these products are
the responsibility of the manufacturers of those
products and are not covered under the warranty
to this appliance.
WHEN NOTUSING YOUR DRYER
[] Grasp the plug firmly when disconnecting this
appliance to avoid damage to the cord while
pulling° Place the cord away from txaffic areas so
it will not be stepped on, tripped over or
subjected to damage°
In Before discarding a dryer, or removing it from
service, remove the dryer door to prevent
children from
hiding
inside,
I Do not tamper with controls°
[] Do not attempt to repair or replace any part of
this appliance or attempt any servicing unless
specifically recommended in this Owner's Manual
or in published user-repair instructions thatyou
understand and have the skills to carry out,
Readand follow this SafetyInformationcarefully.
SAgE THESEINSTROCT!ON$
5